Search results

  1. I

    92nsx's supra build

    You move the lobes apart \ / at the tops this gives less overlap so you're not blowing the charge out the exhaust.
  2. I

    92nsx's supra build

    Might be some power if you open the lobe centres a little. It does seem a bit low for that much boost.
  3. I

    Flywheel bolts keep backing off...

    Well it's NOT like his bolts are doing anything :D (start it and let in run 5 minutes and the flywheel should fall off on it's own)
  4. I

    Project: CNC Machined thermostat housing

    Don't think 1/4" will do it from memory.
  5. I

    Flywheel bolts keep backing off...

    A rope around the front pully it's only a Jz ;)
  6. I

    Project: CNC Machined thermostat housing

    Would it have been better to bring the hose fitting flush with the end of the housing?
  7. I

    GT30R JZ MKIII (stage 2 in slow progress!)

    9's are the new 13 ;)
  8. I

    New 2010 GT500! I want one

    And this is done...
  9. I

    GT30R JZ MKIII (stage 2 in slow progress!)

    Go Casey! Back in the day you would have been GOD with a 13 second street car! (these days not so much ;) )
  10. I

    Flywheel bolts keep backing off...

    How do you start it with no flywheel? ;)
  11. I

    92nsx's supra build

    Did you degree the cams Rob?
  12. I

    negative Rear Camber after Lowering???

    When you align the rear of these cars you're moving Toe and Camber so trust me on this it's +15mm to get the adjuster cams back in the middle.
  13. I

    Toyota Family

    Any of them actually run? :)
  14. I

    negative Rear Camber after Lowering???

    You have to make the arms longer not shorter ;)
  15. I

    Find your Supra on google maps PART II! New Street view added.

    ^ See :D LOLing here!
  16. I

    Find your Supra on google maps PART II! New Street view added.

    (Python nerds will get it ;) )
  17. I

    Staggered Intercooler Piping

    As long as you keep it below critical there's not a lot of difference to be felt in the real world, I did all the math built 2.5" pipes then upgraded to 3" for "future mods" and found that the bigger pipes let the 3540r spool earlier and while there was a drop in speed there was a gain in...
  18. I

    Flywheel bolts keep backing off...

    Pull the crank and have the face ground Eric anything else is a waste of time and effort :(
  19. I

    Help me make 450-500rwhp

    A genuine 450>500rwhp + W58 =
  20. I

    Fixing a Month-Long Blonde Moment

    heeerrr hherrr heeerr he said "anal"
View older results
Top Bottom