Search results

  1. I

    Low compression on #1

    Very welcome, glad it was something simple.
  2. I

    What camera do you guys use?

    Point and shoot Nikon Coolpix 8800, I'm lazy and a bit of a gumby photographer but it takes nice pics with minimal fiddling.
  3. I

    networkingdude's 1990 Supra Build

    Welcome to the insanity!
  4. I

    Loose wires!!!!!!!!!!!!!!!!!!!

    Dunno, do you know exactly what the piston to valve clearences are? There are a few points that it's MUCH closer than when the piston is at TDC so it might have been close enough to touch a valve when it was hot and running, I had this a few years back with my 7M and was only an issue when...
  5. I

    Low compression on #1

    Turn the crank so the cam is on the back of the lobes for #1 then try and slip a feeler gauge between the cam and the bucket, this will be the "lash" if there's too small or no clearence it will hang a valve open when hot and cause a miss. As our motors wear the Lash tends to close down as...
  6. I

    Loose wires!!!!!!!!!!!!!!!!!!!

    Do a hot leak down it may have bent a valve when the cam broke :(
  7. I

    spiller's JZA70 build-up

    The AU/Falcon Fans I'm using have much more "plenum volume" in the shroud than that. Not sure how well it's going to work with them that close, you run the risk of the fans only drawing their own diameter through the core.
  8. I

    Low compression on #1

    Can you hear it leaking at the TB? What's the valve lash on those 2 valves?
  9. I

    So I took my fan shroud off...

    Would work much better with really big cams :)
  10. I

    I can't get the diff out.

    Yep mine's been down a bit over a year, ran into an issue after I got it running just before Christmas
  11. I

    So I took my fan shroud off...

    Could always take the timing belt cover off as well ;)
  12. I

    So I took my fan shroud off...

    ::dunce:: <jk>
  13. I

    I can't get the diff out.

    LOL yeah about the same time frame here I'm hoping to get mine there usder it's own power with a quick gumby road tune...
  14. I

    I can't get the diff out.

    LMAO fuck that my new shed will be heated and air con'd ;)
  15. I

    I can't get the diff out.

    Give em a smack with a Hammer and a piece of Timber they tend to seize on.
  16. I

    I can't get the diff out.

    You've undone the 6 Nuts at the CV?
  17. I

    I can't get the diff out.

    <nodding> the Plunge is at the Tripod end (Diff end) They should flop out of the way once off the Stub axle studs.
  18. I

    So I took my fan shroud off...

    Post of the month! When you consider the potential for disaster if the cooling system fails on a 7M it's cheap insurance!
  19. I

    TooGoode's 2J build

    The lack of Turbo is a temp thing??
  20. I

    Ryan's 92 build thread aka NashMan

    I'll keep that in mind :) (the new place has room for a booth so I might just tidy up the body once I'm moved in)
Top Bottom