Search results

^ snuck in the BHG thing didnt you, hahaha

I really dont have anything to compare them to other than stock and due to my front eibachs being saggy and car riding on bumpstops, I cant say one way or the other. Also my mismatch tire widths make the car understeer like mad. Anyone selling any h&r springs??? :) If I had to do it over...

the height has three 'positions' in half inch increments. My tire would be touching the fenderwell if I dropped the full inch on the struts! Keep in mind these are not 'adjustable' struts as far as valving in the strut cartridge, they only raise or lower the spring perch. These Bilsteins...

Bilstein struts with the adjustable ride height(like mentioned, all the way up now), Eibach springs, stock sways and links. I am not sure if the Eibachs are just sagging but the front is crazy low, I wish I had a digital camera to show you the wheel gap. Lets just say I cant even get a jack...

225/45/16 fronts, 255/50/16 rears. I dont like the tire setup right now with them, I am getting a little rubbing right now in the frontend and with such a large tire in the back I am getting heavy understeer, but for a drag setup, hard to beat. Please note I dont have any wheelspacers in...

^ idle cold start is rough but most likely fuel pump not holding pressure overnight, warm starts are great, I had an epiphany that maybe my tps has a 'hole' in it telling the ecu I am WOT when I am 10-15% cruising, thats the only thing I can think of short of checking fuel pressures. I need...

very interesting, my car just started to do the same thing, I also have a narrow band but its slightly different, at idle o2 sensor wont cycle(NOT NORMAL), cruising it will go full rich(NOT NORMAL), under normal accel, o2 sensor cycles (NORMAL), under WOT, will go to full rich and not...

.86AR.... little large for twins dont you think????

Hey guys, the time has come for more power, I have a T70 (61mm comp) but has a T3 open flange, I also have a ebay manifold(company unknown) but I know its a T4 divided flange. My question is has anyone tried this combo before with an adapter/riser with any success or is clearance too tight and...

getting interested into roadcoarse and autocross, could I ask if any mods to the oil pan/pump pickup tube with high G's on the 7m???

28mpg!!! Average around town for me is 17mpg, hwy (cruising around 65-70) is about 24 at best, these are also running without the a/c on. Good numbers bro.

like previously mentioned, invite him to the track. 90% he doesnt show. If he does show, GL sir.

^ exactly what he said, either back off the cps two-three degrees or drop fuel pressure to compensate for the injector duty cycle(timing). With that much power, tuning would be a breeze with emanage blue/ultimate. You could probably break 400hp just by leaning it out to 11.5-12 and get your...

maybe its a differenty year model steering wheel??? Just still dont get why the connectors are completely different. If anyone is computer savy, the one on the horn button side looks like the old power connectors for the floppy drives except only has three pins, the one on the column side...

hazards work(means the haz/horn fuse works), last night I had an idea to pull the steering wheel on the 88 roller chassis to see what was inside it, I wound up stripping the screws that hold the horn button to the wheel (I was pissed), I finally got my roomate to hold a flashlight and I took the...

Alright, I bought the car and the horn never worked, it wasnt an issue when I was buying my inspection stickers but now my contact has actually passed(sad story) so now I have to pass legit. I traced everything down to the physical horn button itself, I pulled the steering wheel cover and...

I hate jb weld, but it surprises me everytime I see a patched radiator hold... just saying.

you have a problem with chebbies, you got beat by a camaro as you were a kid didnt you, was there a mullet involved??? Whats your deal with a chebbie, matter of fact, I have a 89 roller supra ready for SBC lovin'. twin t3's blowing through a 750 double pumper tweaked for pressure. 600+hp...

that just screams ricer. Lambo doors need to stay on lambos. Gullwing doors need to stay on Deloreans and old school MBenz. Invent something different. Call it 'Supra doors' or something.

you didnt mention plug gap... blowing out the spark?