Search results

Yeah the titan Head gasket I have had the slightly extended rivet, but I removed it just to appease my mind anyway... :icon_bigg I torqued it to the specifications on the paper included with the box, and I used their moly lube. They suggested 80ft lbs when using the ARP moly lube, should I have...

Sweet! and yeah I go to school here so it sounds pretty sweet, I'm not that familiar with those canyons and it would be pretty sweet to check em out... LOL might be a lil hard for me to keep up because at this point I am bone stock except for the rebuild/headgasket

Ahh thank you, that was the reassurance I needed. I remember to remove the rivet, and all appears to be well, the head sits flush with no problems(and yes I had the front plate machined with the block) both the head and the block are lower than 23 RA, I tried to make everything in spec, and I...

OK Guys, I am sorry but I have found this information before, but cant locate it now. My Titan Headgasket covers a large portion of my water passages on one side, it has two holes cut into it just like the other side, but there should only be one hole and it shouldn't be covered up.; I have...

Oh ok, thanks... That is what I expected but i wasn't entirely sure. If they need adjustment, which I am sure they will need, is the best/only place to purchase them at a Toyota Dealer?

Hello, I am wondering how to measure the valve clearance. I searched, and found where it was in the TSRM, http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=EM&P=8 but I do not know what to measure this clearance against. The TSRM is a little vague because it simply states measure the...

ahhh, thank you! i looked in the tsrm but apparently not hard enough.. (I only looked in the manual not the tips and tricks section ) Thanks:icon_bigg

hello, I am wondering if anyone knows all of the vacuum hose diameters on the supra? (7mgte). I am going to try and piece together all of the hoses, and need to know the Inside diameters so I can buy them... anyone know this or where i can find it? thanks

hey thanks for a quick response, as well as more information than asked :) I will be sending my motor out soon to have all of the necessary prep work for a metal head gasket done. I am going to have drift motion do the machine work, and have heard they have excellent results with their...

Hey guys, I am in the process of rebuilding(refreshing) my motor right now, and am going through the process of having my head and block properly surfaced to meet metal head gasket standards. My question is, how are the titan metal head gaskets in comparison to the HKS or the cometic? I have...

Thanks this sounds like the one I will be buying then.... with all those extras that may be helpful seems like he has a hard bargain to beat if all of the parts are as quality as you say. I may end up purchasing some other stuff from him as well... Thanks all for the other recommendations as well

thanks man I appreciate the description

Umm who sells the MDS kits? I did a quick search and couldnt seem to find it...

Damn thats good to know... so you got the full gasket set from him and everything worked correctly other than the throttle body gasket? Does this include everything needed for when I do my metal head gasket? Or should I call him and find out?

Great! I'm wondering though by set do you mean the original parts dinosaur kit from ITM i talked about on page 1 or the more recently mentioned Ishino one???? But that is great news! :biggrinki

haha you are exactly right there... that's what I'm doing just trying to find out what has most likely been done to my car so I can either prepare for the worst or be happy about what I got. Right now I'm saving up so i can put in a metal headgasket, and go from their. Of course I'm doing all...

oh so your shift kitted auto is on what motor? Yeah im stll workng out the kinks with this car, going through it trying to replace whats needed... taking longer than I would like because I'm broke but im trying. so should my 7mgte chirp tires easier than it does? keep in mind its stock, and...

haha well im not looking to buy i was wondering if it sounds like anything else had been done to mine. i purchased the car recently and it was already modifiedd and im trying to figure out what exactly was done

I heard that Ishino gaskets are the same people that make the OEM gasket set. At least this is what one retailer is claiming. They also claim that it is a direct fit (as they all do) but I was wondering if this was a credible statement or not. If they truly are the makers of the OEM set than...

Oh... so what are the issues? is it poor sealing? or do they just not fit right? haha damn I was hoping I wouldnt have to do that. I dont have the money to be able to buy OEM gaskets and then sell the head gasket. haha seems like more trouble than necessary... But I guess thats why people like...