Search results

^^^^ they can perform just fine, because the system is 'straight through'. They just bring the noise down, because the fiberglass 'absorbs' the sound 'waves'. I run a 24" long one in the system right under my console. Then a magnaflow 'strait through' muffler at the back. So my system is...

You don't really need to get a HUGE one. I put one on mine. I researched it out for a while first. I went with one that is like 5"x12"x3/4". But...it has those 'swirls-the-oil' inside the tubes. This one...

Well...your brake caliper may be hanging up and causing a brake drag. A brake and alignment shop can check it, and the alignment. I happened to look at my back wheels one day when I was walking to my car, and noticed the drivers side rear wheel was leaning in at the top of the tire. It turned...

Try some brake cleaner spray. Possibly some finger nail polish remover (non-acetone).

^^^^ I have great desire to help keep all the supra mk3's on the road as possible. 1) because I enjoy mine soooo much, 2) I like it when I see another one go by, 3) it will help keep the aftermarket parts manufacturers making parts, so when I need something, it will be there.:love:

You would NOT fail at my smog shop for having silicone hoses ! Even pink ones !!!:love: Lancaster, Calif. L.A. Co.

Not enough info to really give advice. Possible fuel low pressure. Low fuel in tank. Crap in tank plugging the pickup.

You may have to do this a couple of times.... Originally Posted by mrnickleye Mine had it, too. Air trapped in the heater core, cause its higher than the radiator cap. Make sure heater water valve is open. I would by-pass the vsv for this ***note... water WILL pass thru heater core...

Amsoil claims you don't need any additive with their diff oil. PS. I've been using Amsoil for 2 years with no problems.:love:

02 sensor is the MAIN fuel mixture input to the computer. Get a new one, today. They are pretty cheap from any parts house ($40-80). Bosch is very common, and work just fine. HC is high because of the high CO. It will come down. The NOx is fine now, because it is running sooo....rich...

Hose off the air meter? 17882-42012

I don't believe I've ever seen a schematic of the passages in the engine, but the TSRM, under 'cooling system' has a diagram of the outside ones. http://www.cygnusx1.net/supra/library/TSRM/

^^^^ I used a new wire. It was stainless safety wire from the motorcylce shop. I just curled it around like the others and soldered it in. Use resin core solder.:biglaugh:

What year car? Turbo ? I will look at my '89 n/a tomorrow and see what I can come up with. I am a tech, and have done a/c work on/off for 20 years. The 2 switches on the high pressure line along the passenger side frame do this: 1 completes the circuit for the little fans to come on...

Well, I guess I'm pretty lucky when it comes to fun times in a car. I live in the Mojave desert in Calif. Wide open raods to go as fast as I want. Mts nearby to blast those curves. 1 1/2 hrs to the ocean for scenic drives. Friends up and down the state to go visit. Vegas only 3hrs away...

quote da89sup....but around the rear hatch I was told from toyota that they no longer produce those parts. I got them 2 years ago. But...maybe they are running out of parts for our "near collector cars". hee.hee :)

^^ right. It is there to keep the idle at spec (650-750rpm) when turning the steering wheel while stopped at idle. The connection to the intake air duct is to get filtered air, because it is actually an air bleed directly into the throttle body, which is why it raises the idle. I would...

You'll still have to get those 14mm allen bolts out to get the #3 gasket off. It would be easier while on the car, cause the head will be held tight. Did you try a 1/2" drive allen socket and a breaker bar?? Perhaps an impact gun will do it, before or after the head is off.

The plastic trim is not what seal the water out. Its the rubber under the trim.

I did a stupid thing to mine, so don't you people do it. Oh, you want to know what it was?.. I started the bolt, then just "tapped it on" with my impact gun. I figured it would be ok, since I just pulled the trigger and let right off quick. BAD IDEA !! Apparently, inside the pan...