Search results

  1. Poodles

    Monroe Shock Confusion

    Monroes are terrible, your busted TEMS will probably be stiffer...
  2. Poodles

    T61 Bolt on Turbo by Cx Racing

    I warned against using the stock elbow with this turbo way back at the beginning...
  3. Poodles

    should I remove the fan in front of the radiator?

    MA70 makes no difference, you're assuming the 7M runs hotter than the 1J when in fact the 1J has more power resulting in more heat (in stock form). IIRC that fan is wired the the small aux. fans that are setup as pullers. They kick on when the A/C is turned on, or if you start to overheat.
  4. Poodles

    should I remove the fan in front of the radiator?

    Doesn't matter if you have a 1J or 7M. Power = burning fuel = BTU's The secondary fan in front was added in some markets, it's not a USDM thing but an region thing. Personally it's sitting there, I'd figure out how to wire it back up as it should have the wiring there somewhere. Can't...
  5. Poodles

    Can i use a gs300 crosmember into a mk3 or has anyone done it already ??

    Never seen it done, and more than likely nothing will line up or be in the right place. You'd spend more trying to get that to work than buying the correct sump...
  6. Poodles

    Cool/Rare parts thread?

    Wouldn't be hard to make those LED light inserts, but who would really buy them?
  7. Poodles

    Quiet Supra Please!

    Exactly my point, the system only flows as much as the smallest restriction. My exhaust is 3" all the way through and isn't nearly as loud as an uncorked nur spec...
  8. Poodles

    I'm pretty pissed off. eBay issue.

    The real issue is how ebay's search function works. You HAVE to list items like that to get them to show up properly in searches.
  9. Poodles

    Quiet Supra Please!

    Will never understand running an exhaust that requires the silencer to be in to be quiet. All the silencers are smaller than 3" and seriously restrict flow, so why bother with the exhaust at all?
  10. Poodles

    Supramania's Elite Engine bay Thread...ZERO progress pics.

    Stock rail is extruded, not cast. It may even be billet, regardless it's just as strong as a billet rail.
  11. Poodles

    n/a exhaust

    Old wives tale that has been done since the flapper AFM's were introduced and it works. You must really like selling tuning to people that don't need it...
  12. Poodles

    "ok" monitor

    Pics would help
  13. Poodles

    n/a exhaust

    Completely unnecessary as you can tune the flapper in the AFM if you need to (though I have yet to see a single one need to be tuned RICHER). Go ahead, sell your friends hundreds of dollars worth of piggybacks and tuning...
  14. Poodles

    You couldn't pay me a million dollors to do this once! EVER!

    They're not considered "free standing" because of the guide wires, but they are the tallest manmade structures on earth. It all depends on the weather personally, if that fucker is rocking back and forth I'd freak out a bit...
  15. Poodles

    n/a exhaust

    And you evidently have no idea how the TCCS works. I'll remind you that this is the tech section and disinfo isn't tolerated.
  16. Poodles

    You couldn't pay me a million dollors to do this once! EVER!

    The vast majority of the clime in inside the tower, only the top is "free climbing." I dunno, I'd do it for a million bucks easily.
  17. Poodles

    n/a exhaust

    Yes, and that open loop is from learned values in closed loop, try again.
  18. Poodles

    Zombies Of Mass Destruction

    Zombieland > *
  19. Poodles

    89+ Climate Control Plug and Play with an 88???

    It's quite a bit of work. I had to repair the LED's on my unit when I bought it.