Search results

use +b or +b1. it's powered with ignition in on or start and no power when off.

since you have it stripped down to shell; what if you used spray on bed liner? hmmm? just an idea

you could put an on/off switch on TE1 & E1 shorted when on, open when off.

constant = BATT ignition on = +B, +B1

http://www.cygnusx1.net/supra/techtip/antenna.html

let us know what you come up with. here's a cf dash cover http://www.supramania.com/forums/showthread.php?t=11240

you may wind up having to helicoil the stud holes http://www.supramania.com/forums/showthread.php?t=3998

http://www.supramania.com/forums/showthread.php?t=18039

how do you know you're running rich? wideband readings? our cars run pretty rich stock. as rich as 10.0:1 a/f under boost. to rich will wash the cylinders and contaminate your oil.

I have the same problem. It creates a lot of play in the accelerator pedal before it picks up the cable. Taking up the slack is done by moving the nuts closer to the passenger side, then tighten the nut on the other side down. I've adjusted mine all the way out but still have slack. I'm...

courtesy of Dylan two spots, one shown in the pic. the other is on the other side just under where his thumb is

Autolite 3923 http://www.mkiiitech.com/forums/viewtopic.php?t=36 Its recommended not to regap iridiums. http://www.spark-plugs.co.uk/pages/specials/Denso.htm

this is my final version that includes a cute graph :)

You can have any of my contributions: HKS S-AFR wiring installation Zeitronix ZT-2 Wideband wiring installation Aftermarket Alarm wiring installation -'91 MKIII Valve Shim Adjustment worksheet SAFR Gain Adjustment worksheet EVC IV settings quick tips and instruction documents

(87-88 only) Fog Light rewire to come on without the headlights Article# 41 http://www.supras.com/06/techcenter/display.php?QID=41

for me, I just did the tems firm override

If you meet the safety requirements, i.e. battery tie down,..., I'm sure they'll let you enter. Just go with the intent to have fun and see how your car handles. I wouldn't expect to win cause our cars are so very heavy. But it is a blast. I've gone a few times. Good luck and have fun.

I hear ya NJsupraA70. I wouldn't like someone sticking my name on something that looks like crap. Your diagram looks great and I hope they remove the other one.

I know I've seen that pic before. I think someone use to have something that needed 12v and tapped off that wire. Does it have 12v on it? I knew it - http://www.supramania.com/forums/showthread.php?t=9732

http://www.cygnusx1.net/supra/library/TSRM/fa/FA_38.html