Search results

Just curious why you're deleting abs? It's really not that much additional weight in the car and helps a ton with braking. I don't know why I didn't get an abs shell sooner! Sent from my LG-LS980 using Tapatalk

Any word from him guys? Sent from my LG-LS980 using Tapatalk

havent really done much, ive been out of town since last week. the only thing i had done was the 2.5" extension welded onto the compressor housing. other than that, im still waiting on the cometic exhaust gasket to arrive in the mail. until then, heres some more pics Sent from my LG-LS980...

i sprayed the exhaust housing, manifold, center section, downpipe, and manifold support with some DEI Silicone high temp spray.

I happen to come across his friend on a mk3 supra buy sell trade page, which he had work done by Carlos. The only thing I got was he was busy and didn't have time to update you guys. That was April 18th, still no word. While I was typing this post out, his friend forwarded evil_shenrons post...

I haven't ran the det3 for a awhile but iirc, the det3 creates a fuel map based off the afm signal. Once you've ran the car with the afm, there's a menu to select to convert from maf to map. I can do a little looking on my laptop and see if I have my original fuel map that you can use that has...

I had a total of 3, 1/2" spacers that I sanded down with a slight angle to each of them. Each time it didn't clear Id add another spacer and it fit the best with 3 total. I had an extra one just in case but I think that would have sat it up too high. There's a picture of how I had the spacers...

Couldn't wait to see how it looked bolted to the car, so here's some pics! First attempt hit the a/c lines. Second attempt hit the strut mount. Third attempt cleared both, but does sit up quite a bit. I kinda like it! I'll be running solid delrin engine mounts, so I don't think I'll...

Now that I'm getting some steady work, maybe in a couple weeks. I've actually purchased all of the paint supplies already to paint it. I had it matched to the other fender. Iirc it's ppg with thinner, primer, base, and clear with hardener. I don't know much about painting so I'll have someone...

I was getting a similar color/issue when my heater core was leaking, I can't recall what color it was though. Wipe your finger on it, just a very small amount and see if it smells or tastes sweet. I'm not quite sure how an exhaust leak will make its way all the way onto the windshield Sent...

not quite sure i havent had a second had to measure since the exhaust housing is with a friend of mine at his machine shop getting the exhaust v-band flange milled down. im sure its only a few inches at most! may have to go back to solid engine mounts again to reduce engine torque/flex. they...

Drilled and tapped a hole for a vacuum hose fitting. Also test fitted my old drag tires just for the fun of it. They don't hit anything being lowered, but I'm sure once it squats down on a launch they would rub a bit Sent from my LG-LS980 using Tapatalk

Test fitting my new turbo Sent from my LG-LS980 using Tapatalk

Test fitting. This will be an extremely tight fit! Sent from my LG-LS980 using Tapatalk

From what I understood from my insurance company is they will give me the actual car value of the area, which is very very very low here Sent from my LG-LS980 using Tapatalk

This is for a 92 with 141k miles and all the options minus a sport roof. 10,200 fair value 15,929 excellent value. These are definitely not at all what people would pay for an mk3 supra however Sent from my LG-LS980 using Tapatalk

A nice box from the ups guy came in today and I can't believe how nice this turbo is. Its a reman holset turbo, but I was expecting some "used" pieces on it still. Almost everything looks brand new. It sure weighs a lot so I'll fab up a header support so the head doesn't take all the weight of...

Started mocking up the power steering pump, just need to have the bracket welded on. already looking a lot better than the relocated factory resivour.

Today I finished putting the power steering pump in, no leaks! Super happy about that. My hard to find 2jzge distributor connector came in too. I had a really hard time finding one but finally got one from wiring specialties. - 10 and - 6 fittings came in for my power steering resivor too. I...

Got a little bit done yesterday while it was nice out. I recently replaced my power steering pump but it started leaking, but only when the car was not running. I even put the car on Jack's with it running to see where the leak was coming from... Nothing. Then while I was cleaning the air...