Search results

  1. supraman7mgte

    Paging Mohammed, Paging Mohammed

    The White Zone Is For The Loading And Unloading Of Passengers Only......testicles......
  2. supraman7mgte

    auto went bad

    If your having shifting probs,it might be a host of problems.The auto is expensive to repair or rebuild. I had bad fluid in mine and just simply replaced it and put fresh fluid in. You can get a used one from a host of j-spec parts importers on the web. Mine was $175,and was put in about 6...
  3. supraman7mgte

    How to shim the CT26 Wastegate?

    I am,the block is totally stock,10 psi
  4. supraman7mgte

    bit different !!!!! what u all think ?

    I think you should have gotten the next size bigger intercooler...lol
  5. supraman7mgte

    Engine bay detailing

    Just get a big bottle of Simple Green and go to town. I also used a dish scrubbing brush. Just make sure to put a towel down the spark plug galley,or you'll be sorry!
  6. supraman7mgte

    Help Annoying Idling Problem

    Have you checked the ISC valve? The TSRM will show you how to check it,I had the same probs but just replaced it with a used one
  7. supraman7mgte

    Removing Steering Wheel

    leave the nut on a few turns,keeps the wheel from taking out your front teeth,the hard way
  8. supraman7mgte

    crap, I don't remember taking this off...

    yup,under your maun fuse block by the battery
  9. supraman7mgte

    pics of cut stock bumpers

    none whatsoever.the driving lights are spaced far enough from the radiator opening to allow free air flow.
  10. supraman7mgte

    Air-Air or Air to water??

    dunno,but youll need a resivoir ,pump and more necessary hardware to get it to work. air-to-air is free!
  11. supraman7mgte

    will it

    a bad isc would make your car idle low,right? its kinda like a stepping motor,that you can hear when you shut the car off,its near the throttle body on the intake,and goes "tika-tika-tika-tika" when the motor is turned off
  12. supraman7mgte

    How to shim the CT26 Wastegate?

    yup,i got about 10 psi now by adding a few washers. i hear that it might stress the actuator,so its good for now until something breaks!!
  13. supraman7mgte

    Steering Wheel change

    added note,if you want to use the horn,you'll need to add a piece of metal to ride on the underside of the bras/copper thing to work as a ground. i used a piece of metal coat hangar bent in a curl to constantly make a connection and screwed it to where one of the spiral thingy's mount holes went...
  14. supraman7mgte

    Steering Wheel change

    when i took off my wheel,i took off every part that was not needed. the wheel,duh,air bag 2X duh,and yes,the connector spiral thing that works the cruise control(for auto's) one wire is for ground,and the other three work the cruise. i plan on hooking it back up,but putting the cruise nob in the...
  15. supraman7mgte

    supra on ebay...

    probably the new shit smell when the guy that bought it saw the odometer
  16. supraman7mgte

    supra on ebay...

    THAT was a car worth every penny
  17. supraman7mgte

    bov ideas

    i have the monza look-a-like hk$,they are identical throughout