Search results

Drive around for a few days and check the oil in the mornings. You dont seem to know much oil you are burning ....So relax and give it a week or so. There is nothing you can do to stop oil from burning except fix it. Dont bother with stop leak products they only waste your money

I don’t take my hood off I just pop off the shock ..... it has a release Pull it together. Saves time and effort. I am a modern day "He-man" and that r154 is kinda heavy. It was a nice surprise laying on my chest :) and it was even more fun putting it up by myself …. Well not...

Nope never tried too ....

Since you are best pals umm im going 600 bucks 250 or so for parts and 350 for his time

The 1st picture connects to the 5th picture the pipe looks like a question mark ... I think its called crankcase vent The 2nd picture is believe is a small radiator hose that runs to the ISC (idle speed controler) The 3rd picture is the dump vac it will run up through the intake to a...

I did it also .....

Ummm maybe you need to learn how to drive a manual better I am a hard driver ....... but thats b/c i am trying to get off of the clutch ASAP maybe you are on the clutch to long. I dont even wanna talk about how many tires I have gone through Like i said i have put alot of miles on that...

None of the above I dont think but I will ask him ..... But all I know its just a disk made from a shop that makes big heavy duty disks and pressure plate for dump trucks the only difference is the size All I know is that I am happy with it. However on my maxima its a bit harsh unless I...

6 puck disk and stock pressure plate here. I have been using one since 2005 with different cars. With the MKIII it was the smoothest engagement of them all and I have not had one issue with mine and I only spent like 120bucks for everything pilot bearing, throw out bearing and a resurfaced...

Head gaskets go because of detonation.

What does boost have to do with the headgasket? I am still on a stocker. Lol there is nothing wrong with the stock head gasket..... its the weak tq specs of 54lbs my lug nuts get more tq than that. I am using stock bolts and headgasket tq down to 75lbs

is that tap RPM dependant?

I have been pushing 14psi for two and half years. When I purchased the turbo is had a very small amount of shaft and it still has very l little shaft play and I have put 50,000 miles easily.

Anime ..... Baka

someone loves music

Wouldn't bigger rotors and more piston calipers cause the tires to lock faster even with good tires? I was decent at manipulating my non abs camaro but sometimes i was not able to move my feet quick enough to pump the brake to keep from locking them up

Ha imagine if you did not have ABS you would have been sliding and you might have slammed into the car or lost control. ABS kicks in only when there is a loss of traction while braking. I dont think there is any argument on that. I remember my 80 Camaro had some scary braking on wet roads, but I...

Do you realize that the stock ct26 at 14psi is putting down 300(+/-)rwhp without real tunning? That would be around 350 at the crank. Your figures and goals are so low if thats all you need get the stock ct26 rebuild boost up to 14psi and a fresh stock block. Then call it day.

I asked ARZ about his kit and how abs works with Big Brake Kit and this was his repsonse Keep the ABS!

But then again have you been in a car with an upgraded ct26? Those things are pretty damn fast :) my friend has a 60-1 untuned and its pretty fast at 10-12psi. I am boosting 15psi on the stock ct and we are pretty close ...... But I am a way better driver than he is mostly b/c he shifts in slow...