Search results

it comes with the pump from toyota

just be prepared that you might have to have the pulley shaft on your 2j pump machined...I had to have that done when I swapped mine so that all the pulleys lined up.

make sure you get the waterpump housing as well cause the one from the hydrofan apparently does not work.

Just be safe and get a 2jz waterpump, and pulley from toyota

From what I have read from doing research is you can take a piece of hose from the inlet to the outlet on the hydrofan but eventually your pump will just burn up as there wont be sufficient cooling of the pump.

A Supra is the only way to go.

I will probably end up just getting a stock one just cause I dont have the time to wait for shipping and such from driftmotion or some other business with aluminum since the supra is my only vehicle.

I plan on going electric because of the climate where I live not being overly hot. I think we've only really had 5 days of really hot weather this summer. Can I just use a stock waterpump pulley from a 2JZ?

I have done research and have noticed that the waterpump on a 2JZGTE is a direct bolt on replacement to the hydrofan on a 1JZ and then you have to run either e-fans or a clutch fan. Can someone verify that the 2JZ pump will bolt onto my 1JZ for me because once I buy the pump Toyota wont let me...

My hydrofan pump is toast so I am going to go with a e-fan conversion in my jza70 since a new hydrofan from japan is ridiculously priced. I am curious as to what fans people are running in their vehicles and maybe some pros and cons. Also I did some research and I read about using a relay off...

jumper E1 and TE1 with a paperclip

I'm there if my car is ready by then.

i used a paperclip and jumpered E1 and TE1 and my check engine light went ... BLINK pause BLINK BLINK BLINK. I have tried searching for what the different codes are and was not able to find much so if anyone can tell me what this is that would be amazing!

BUMP. I need this asap. Thanks

I did not use the harness. The parking brake wire is the black wire that comes off the parking brake switch correct?

I just installed my HKS Turbo Timer type-0 and it turns on and counts down but when i turn off my ignition the engine turns off but the timer still counts down. What did I do wrong?

Just put your battery back in temporary and roll them windows up.

Pretty straight forward. Where the hell can I get a gasket for my hydrofan pump, or is there a gasket for something else that works?

sounds good to me. i have only bought a few things over the forum using paypal so you'll have to tell me how money orders work but other than that i dont see any problem doing one. Thanks a bunch.

As stated in the title I am in need of a pulley for my power steering pump. Does anyone know the part number for this part or a replacement that will work? Thanks.