Search results

Exhaust is tight just replaaced a gastket. And balljoints are new last year frrom MOOG annd no play in them.

No its not so much a vibration. And no it doesnt change with engine speed, the only thing is its very consistant when going over 20 km'h also not the knock/rattle goes away or seems to be less obvious if turning right, turning left is still their. I know that discription would cause it to sould...

Hey guys I dont know if this has been discussed before, so please dont flame me for this if this is a repost. Anyway, when im driving anything over 20km/h I can hear and feel a rattle from underneath the car. It sounds like something keeps bouncing off the floor, cause I can also feel it in my...

Unfortantly 1990 is the oldest of the electronic manuals. I have an '89 supra but I have to use the manual for 1990 if I want to do something so out of luck here. Youll have to find a hard copy.

That is all and true. But when the O.P. comes onto Supra formus and asks for MKIII owners for input on a AE86, you'll get a MKIII answer. If this was the Supraforums they would of have said "1j it or 2j it end of story bro."

Power to weight ratio. Why do you think all those little pocket rice rocket civics and other cars are fast. Light weight bodys with engines that produce more power then they'll ever need. Take what the car weighs from factory work out its Torque to weight ratio 1047 kg / 97 lb·ft... So that...

Have you seen any videos of how insane the 7M or any other Inline 6 that toyota makes can do with this car. All torque and half the weight of a MK3. Like I stated before Step 4:evil2: PROFIT!!!!!!

If those are brand new pistons as you say. I would be seriously demanding my money back not just asking. That could have easily grenaded your engine.

Step 1 keep AE86. Step 2 put in 7M-GTE. Step 3 ?????? Step 4 :evil2: PROFIT!!!

Just putting this out there teens and sportcars dont mix. Fast cars and even faster owner can leed to MK3 disaster. Also like other posts have said, limmiting yourself to such a small time frame is never a good idea. Even if it does get running, you still need to make sure everything is how it...

bleeding the clutch takes a while. Took me about 30 mins of pump and hold with someone in the car. Also make shure you keep topping up your Master as it doesnt take much bleeding for it to go empty again... then youll have to start over again. (happened to me *facepalm*) But what you described...

I work in the shop at the local Toyota dealer in my area. So hose clamps and other hardware isnt a problem. Although I always get the 3rd degree for having a MKIII

Just a heads up guys I just purchased a full 26 piece black silicone hose kit. I had to replace the factory hoses (all of them *facepalm*) because I looked under the hood today to fine all my vacuume likes are starting to age and all my Inter cooler hoses are cracked at the clamps... so yes Im...

Is it actually releasing the clutch all the way. Also is the clutch master tight to the fire wall. I ask this casue i just replaced my slave 3 weeks ago and found when I went to bleed the system that the master was missing a bolt and the other was loose allowing the master to move away from the...

R154 or W58 makes a difference as the AISIN one when clicked on shows a W58 or Non-turbo tranny slave cylinder. Even though you selected turbo there are still Non-turbo slaves thrown in the mix for sum reason.

I know this sounds stupid and like a troll. But I use Penetraiting oil on stuborn grease. It cuts right through, but you gotta scrub with a rag and wipe it down after with another clean rag. Also it leaves a nice shine on that paint.

I litterly just replaced my slave last week cause it pissed out all the fluid over the winter time when it was in storage. I also had to replace 1 of the Clutch Master bolts and tighten up the other before I bled the system. I ended up finding the missing bolt inbehind the fuse block under the...

I saw that kit as well and yes they have black as well as blue and red colours. I was looking to buy them as well. There was another member looking at that same companys other kit I belive it was the 16 piece kit and they said it was a direct bolt up replacement. And it does say 4 ply silicon...

Too bad for you guys Ive got the real online TSRM all the time from home or work (Its a Toyota Dealer) any North America Toyota from 1990 and up.

1st off did I read your post correctly, did you say you trimmed the intercooler hose shorter. (Im also assuming these are the toyota hoses by the look) If that is the case you should never have had to because they are ment to fit a certain way. What it sounds like is something is pushed.. but...