Search results

For most people I think driveway/parking space is limited or they would have multiple cars and projects. When I had my 87 non turbo and just got my 87 turbo, the 87 non turbo did sit more that it should have. Personally I think one of the best combos to have a stock 2nd gen Lexus GS300 and keep...

The OEM intercooler core side to side is 18.5" (23.25" to intercooler pipe) and core top to bottom is at 12". I attached 2 pictures. In my opinion when going aftermarket, I think you will have a hard time finding a similar size intercooler and you would like the DriftMotion intercooler kit...

I have a extra good CPS you can borrow to test yours if you are up my way from my 87 Turbo. I bought a remain CPS but my old one was still good. How is your engine wiring harness? Any changes to it or it is original?

You are welcome. Just in case anyone needs another source... I was at NAPA and they have 7 pieces for $6.49. I attached a picture with the part number.

I am going to be rebuilding my engine harness soon for my ECU Masters standalone and 1200cc precision injectors. I ordered 2 100 ft coleman cable 18 gauge wire spools, a few other different gauge sizes in smaller feet such as for the starter and alternator and what ever new connectors I can get...

57209A looks like just metal bracket itself. Are you talking about the rubber transmission mount like this https://www.driftmotion.com/R154-Toyota-Trans-Mount-MK3-p/dm306.htm ? The only two rubber pieces I remember seeing back there are the transmission mount and the rubber gasket for the...

Looking good. Nice red you selected.

You're welcome.

Here is a pic of my rusty gas tank before I cleaned it up. Also that green vent for the charcoal canister just spins freely in the tank and to my knowledge it does not line up or go in any certain way as I had to change that whole top metal tube part on mine.

I would give you the advice to even test your new parts. Just because a part is new, it does not always work right out of the box. I ordered a remain A1 Cardone CPS and it was no good. Same with their rack & pinion. What spark plugs and gap are you running? What type of fuel injectors are you...

No, unfortunately it did not come with a damper. It was just the remain steering rack and new inner tie rods. I would think there has has to be a alternative part that will work with for it.

I wanted to give this thread a update: Thanks everyone for the input. I ended up buying a remain A-1 Cardone steering rack from Advance Auto Parts. It had a very small leak on one of the metal hard lines on the unit so I exchanged it for another one. It's been on for a week with the 2nd...

Sounds like it's going to be a great time. Too bad I am soo far away. Hope to see some pictures of the event.

You are welcome.

The top one looks like it goes to the ABS sensor on the transmission. The bottom one is the same shape connector as the heater valve vsv, 3rd alarm horn (next to brake booster mounted on the firewall) and the reverse lights on a manual transmission. Also same as the fuel pump as well. This is...

If you are not getting spark and your igniter is good, how is your CPS? I just had the issue today and my CPS failed while driving. It dropped RPM's hard, sputtered then died and would not start. The thing is mine was a new remanufactured a1cardone unit too. I put my old one in since it was...

A high output alternator should not cause your problems. When i usually hear about the 3k rpm cut off from others, its usually the AFM and if it not that then it's usually followed by a bad TPS.

Are you going with PTFE hose for your fuel lines? For my upcoming build I have ordered most fittings from anfittingsdirect and their fuel hose is very good quality stuff. I also ordered a an fitting tester where you hook it up to a air compressor and you can test your lines you made before...

No problem. I am wondering myself now where did that gauge face come from in the bottom of that #10 post. It sure does look very clean.

No problem. I also wanted to update this thread and let you know that I was at AutoZone and they had a section with small packages of clips in the isle and I saw one that said Toyota body clips which also looked similar as to what you might be looking for. You only get 2 and the price was about $6.