Search results

Rich from SPI sells them. http://www.sipracingmailorder.com/servlet/the-7mgte-7mge-Toyota-Supra/Categories

:3d_frown::3d_frown::3d_frown: On second note yes you should sell your supra go and buy a civic. You do not deserve a supra.

If you have already tryed to start your supra with out the injector resistor pack in place and have the low imp injestors in, your ecu also might be smoked. opps. hard way to learn.

Now say thank you to shaeff.

YES I can see said the once blind man. Ummm....oil pump fail. Ok, Im safe I ploped down $208 for a new one from Jeff at champion:biglaugh: Sucks to read about a another 7M failing, and by the sounds of it you did everything the correct way and even started with new OEM block and head...

TSRM if you don't already know where it is.

Host pictures here at SM so I can see the carnage. I cant see photobucket :'(

For the lines call up Arron at driftmotion and get the Full length clutch hose, for $45. It is 10 times easier to install. http://store.driftmotion.com/Static/Itemfulllengthclutchhose.php

Oreilly auto look at part #'s CSA103751 Slave cylinder CMA350012 Clutch master cylinder

Remember to install a 5 or more led bulb there. I tryed install LED in mine with only one LED it it and it was not bright at all.

No prob. This is the only free trick, and it works GREAT. Other wise like Shaeff said the updated dip stick is eaiser to read also. You go a head, I will save my oil from cavitation, aerating, and swinging the crank through my oil by running it at the correct level ;) It takes all of 10...

McIcan'tbelievethisthreadisstillopen

So what is your question again, and why did you make this thread???? Or did you make a thread to just make a statement that you are buying a EMS? Well here is my statement: I hope series 2 EMS will support DBW *crossing fingers*

I still think the cold weather is playing a roll even in the 20's it might make things a little tough. Your slave cylinder could be getting weak. Remove the inspectin cover on the drivers side of the tranny and have a look at it and see if you can see it leaking. You might need a friend to...

I have broke mine twice getting to those bulbs. One trick is when you change them, make sure you do it when it is warm out and not cold. Cold plastic breaks easier.

He must have delete his train wreck. A good thing, ROFL And nice "cluster" IJ ::hooters::

I say 7mm, you say 5mm, others say 10mm. LOL

Drill 3 super small holes in dip stick at the bottom, top and center of the XXXXXX marks. This way it will be easier to read. If there is oil in the bottom and center hole oil level is good. Oil in top hole there is too much oil in your system, and if oil is only in the bottom add 1/2 qt. If...

Since you were Rudely awakened, that means you don't want a job and rather sleep????

WHAT? just put 7mm worth of washers in there, then tighten everything back up. EASY, should take 30 sec. to do it. Yes inside the plug