Search results

  1. S

    What do you think about these wheels? XXR 006 Gold **PhotoShop Added**

    I agree. Gold and Red go together pretty nicely! Those look like 19s. I can't decide on what style I like better. SSR or the Work VS-XX. I haven't found a good replica of the SSR that come in the right size.
  2. S

    What do you think about these wheels? XXR 006 Gold **PhotoShop Added**

    They run about $599 plus shipping. So they are pretty cheap. Come in 18x8.5, 18x9.5 with +35 offset. Peferct!
  3. S

    What do you think about these wheels? XXR 006 Gold **PhotoShop Added**

    Just ran across these wheels and thought they looked good. i didn't know the 006 came in gold and with only 5 holes and not the uni-bolt pattern. I think they look pretty good. What do you think? I was thinking of getting some used wheels off RBWheels or Memoryfab. Maybe some Work...
  4. S

    Hesitating and stumbling over 3500 RPMs. Help! **Update**

    I tested someone elses AFM and it didn't change at all. I get no codes on dash or in diagnostic mode.
  5. S

    Hesitating and stumbling over 3500 RPMs. Help! **Update**

    I've felt it boost. Just not for very long. The highest its ever gone is probably like 4500 RPMs. It has gotten worse recently. Before it would boost and then feel like it falls flat. Now it just bucks and bogs down right when boost starts. Probably gotten worse because the mods i've done...
  6. S

    Hesitating and stumbling over 3500 RPMs. Help! **Update**

    Noticed a couple things today. If I sent in traffic for a while it gets worse. As soon as boost starts, it bucks pretty bad. I have to drive like a grandma. Also noticed that it will not rev above 4000 RPMs in Nuetral.
  7. S

    Hesitating and stumbling over 3500 RPMs. Help! **Update**

    I think what i'm going to do next is replace all the Intake manifold gaskets. Supposedly this car got its Headgasket changed and then never driven for 7 years. But every gasket I take off looks like the original gasket. I'm thinking whoever did the work just reused them. I'm running out...
  8. S

    Hesitating and stumbling over 3500 RPMs. Help! **Update**

    Update....finished Helicoiling the threads on the head and got everything back together! Runs a little smoother, no more exhaust ping....but it still BOGS under boost!!!!! :: angry :: Son of a b#&@h!! Maybe I one of my intercooler pipes is loose and I got a boost leak! Still got no codes...
  9. S

    7/16 exhaust studs

    I tried Lowes and Home Depot. I will try Ace and Napa today. They were closed for Easter!
  10. S

    7/16 exhaust studs

    Anybody know where they sell 7/16 exhaust studs like the ones Drift Motion sells? I ordred a set and helicoiled my head, but I screwed up one of the studs. I need another one. I checked the local auto parts stores, but they don't have any.
  11. S

    Wheel Fitment & Question Thread

    How well would this size fit. 18x8.5 +48 18x9.5 +36 Would it clear the front suspension. Would I need a spacer so it wouldn't look so tucked in?
  12. S

    how hard is it to replace oil feed and return line to the turbo?

    Have you tried to tighten them? Its a PITA, But doable. Mine were only finger tight. Somehow managed to get a ratchet on them and tighten them down. Hadn't leaked since.
  13. S

    Hesitating and stumbling over 3500 RPMs. Help! **Update**

    Guess I will just take it slow. Can't be much worse than it currently is. One is stripped really bad. And two of them keep backing out over time.
  14. S

    Hesitating and stumbling over 3500 RPMs. Help! **Update**

    Ok. So its not a clogged cat! Installed a BIC DDP downpipe and it still bogs pretty bad. I think I may have finally found the issue! Sripped exhaust studs. I'm guess that would cause the issues I have been having. I guess I'm going to order the Driftmotion 7/16th kit. How difficult is it...
  15. S

    weird clutch noise going on when i slip the clutch to get into first!

    I think I have the exact same noise. Mine almost sounds like my tires are spinning. I have a Spec Stage II clutch. Its got about 2500 miles on it.
  16. S

    My Poor car.... =''(

    I guess if it was a "Real Wheel" it wouldn't have gotten damaged! Sorry...just funny how some people think expensive wheels are incapable of getting damaged. I've seen much worse get fixed as well. You would be amazed.
  17. S

    suspension/steering pop noise

    Is it a metal on metal sound? Could be your front steering knuckle stopper. The cover on mine was worn out and would occasionaly make a popping sound. Replaced it with a new one.
  18. S

    Like These Rims?

    +1 on any wheel will be f*&#ed hitting a brick on a road at highway speeds. Just ask my brother. He totally screwed his Piaa Super Rozzas on his 350z. One wheel was worth more than my Rota's on my 280Z.
  19. S

    Bilstein + Eibach = Bouncy!

    Ok, well I changed the Bilstein's to the middle setting. It definately seemed to help. Still a little bouncy. Highest setting would probably even be better. But I got the Bilstein's for the extra drop!! But now I got a new problem. The upper mount is stripped and I couldn't get the passenger...
  20. S

    Bilstein + Eibach = Bouncy!

    I don't think the problem is with the Eibachs. I think its combining them with Bilsteins and putting them on the lowest setting. I'm suprised more people haven't had this issue. I've seen a few threads. But nobody mentioned a solution.