Search results

  1. modmonster2008

    7mgte stalling problem, Code 14 HELP!

    i replaced the spark plugs a few days ago, it didnt help much. im really starting to be confused as to whats wrong with it. i dont want to go buy a ecu harness just yet, at least pinpoint whats causing it
  2. modmonster2008

    7mgte stalling problem, Code 14 HELP!

    Yeah, i figured. The TEWD doesnt show any relevance between the theft deterrent system to the stalling issue however common sense lead to me that maybe the previous owner may have tweaked with the wiring in the car.
  3. modmonster2008

    7mgte stalling problem, Code 14 HELP!

    so because it runs for the few seconds i dont need to check for IGF signal? i have replaced almost every ignition component minus the ignition switch, i even checked if the theft deterrent ecu could be faulty and causing it to shut off the ignition but it didnt change much after bypassing it
  4. modmonster2008

    7mgte stalling problem, Code 14 HELP!

    yes, it runs for a good 5 seconds then something shuts it off
  5. modmonster2008

    7mgte stalling problem, Code 14 HELP!

    i opened that part of the harness up (took the plastic shield off, doesnt seem to look like it has any melted or frayed wires
  6. modmonster2008

    7mgte stalling problem, Code 14 HELP!

    Hey guys im having trouble getting my car to idle constantly ever since i bought her a few weeks ago, previous owner said just needs a head gasket replacement did that but still doesnt want to run. Pulled the DTC and its showing a code 14 for for "No IGF signal to ECU". I read through the TSRM...
  7. modmonster2008

    7m-ge hg torque specs

    when i do head gasket jobs on a 7m typically i do go for 75 ft. lbs torque on the bolts, make sure you torque them up as you go, start by torquing all bolts to 35, then up to 50, 65, then lastly 75. may seem unnecessary but actually helps even out the flattening of the head gasket. btw youre in...
  8. modmonster2008

    Import face off meet

    if more supras will go i will as well
  9. modmonster2008

    Project_2012: 7MGTE Powered MK3!

    Been a while since I last updated this thread, put in a rebuilt motor with 3" piping all the way turbo-back with a custom elbow so the opening isnt as restricted as the stock one. Upgraded to the suprasport SS braided turbo lines as well as OEM toyota head gasket on this one with ARP head studs...
  10. modmonster2008

    Heat Loss inside cabin

    so you are saying in general that my servo motor is bad? or is something else giving it that bad input making it move around?
  11. modmonster2008

    Heat Loss inside cabin

    Did the servo motor test per TSRM it is functioning just fine. NOW i have a question, the Climate Control is set to 85, but i hear the servo motor making short moving noises and the temp changes accordingly to the motors movement, what could be the cause of the motor to be moving back and forth...
  12. modmonster2008

    Heat Loss inside cabin

    Which manual would that be in?
  13. modmonster2008

    Heat Loss inside cabin

    IJ where is the temp rheostat located? ill do some checks on those, would this cause the previous issue of heat at 85 but when the CC is at 65-84 its just blowing cold?
  14. modmonster2008

    Heat Loss inside cabin

    Hey guys, I noticed this morning that my heat stopped working. So before anyone makes any assumptions or anything, I do have coolant in the system, it was working perfectly yesterday, and the two heater hoses both inlet and outlet are around the same temperature based on my laser temp reader. I...
  15. modmonster2008

    Supra meet

    Id love to go, if only my supra has a running motor, i dont think my celica would keep up with the Supra's :3d_frown:
  16. modmonster2008

    The Breakdown Connection Hotline

    LOCATION: Seattle, WA and surounding areas NAME: Arvin Encomienda (Vin) SHOP: Garage PHONE: 206-661-3748 TOOLS / SERVICES: hand tools, floor jack, jack stands, Engine hoist, arc welder, air compressor, Gas can, jumper cable, OBD2 Code Scanner, multimeter, solder gun, troubleshooting/diagnosis...
  17. modmonster2008

    Project_2012: 7MGTE Powered MK3!

    ^ Thanks, yeah block wasnt resurfaced. Using Titan 1.4mm MLS gasket, holding up pretty good, OEM blow off valve isnt connected to anything right now I havent removed and covered the ports yet, im not running the Bosch platinums anymore but oem DENSO from Toyota, expensive per plug but worth it...
  18. modmonster2008

    Supramania Instagram Thread

    followed as arcomienda2012
  19. modmonster2008

    Project_2012: 7MGTE Powered MK3!

    Hope everyone had a good Christmas, I got a package from Driftmotion the other day and it was my new CPS connector :D I was able to wire that on and definitely the car doesnt have a hard time starting anymore, and a good replacement from the old brittle one. I also got a new CT26 off a low...
  20. modmonster2008

    Help: Car shakes/vibrates after clutch install!

    I made sure to install the flat side against the flywheel, I even spun the disc against it to make sure nothing rubs against each other, it just idles around 1800 with a light vibration. The chassis yes, but the motor and trans? no.