Search results

  1. C

    87 turbo into 89 na wiring issues

    In putting my 87 turbo manual engine into a newly aquired 89 na auto body. The problem im having is w/ the wiring for the body. I have an 89 male connector but dont know what wires go to what. Im also having a problem with a connector that only allows me to use half of the wires. Does anyone...
  2. C

    87 7mgte into 89 GE wiring

    The unique situation with this is that I have an the connector for the 89 body but just dont know what wires I need to splice to make this work. I also have another question, one of the plugs has only one side that is able to be pluged up due to the lack of wires from the 87.
  3. C

    7mgte TPS rewire for Q45 TB

    I can't find any write ups for it. Does anyone know where I can get the info or how this mod is done?
  4. C

    Nm short shift april 28th

    I would like to know this as well.
  5. C

    Nm short shift april 28th

    Dude I want one!!
  6. C

    Porting Stock Turbo Exhaust Elbow

    How much did it cost to get the welding done? What materials were used to weld the holes shut? I just started with the gringder today and im half way done!!!
  7. C

    Hi SC people :)

    Whats going on, im in the MET. Always good to know another Sup is in the house. Im surprised you don't see many MK4s, Ive seen a few high end cars down that way including NSXs, Ferraris and Supras. Well anyway, good to have you here and if im in the neighborhood ill have to swing through.
  8. C

    Porting Stock Turbo Exhaust Elbow

    What tool would I need to bore out the elbow?
  9. C

    Whos supra is this?

    Another reason why everyone doesn't need a sup....uh well you like what you like I guess.
  10. C

    Porting Stock Turbo Exhaust Elbow

    Thats actually a great idea!!! Less things to unscrew on a any car is a good thing!!! If the elbow porting goes through I will definantly be going this route.
  11. C

    Porting Stock Turbo Exhaust Elbow

  12. C

    For those using ebay manifold....

    how are your manifolds holding up? I was looking at the other ebay mani that is portrayed to have reinforcement, but when i talked to him he said that he whould only recommend 400hp at the max and I was like WTF. the stock turbo does that on the stock mani. So waht are you guys doing to...
  13. C

    1/4 Mile Vs Hp

    There was someone on here who ran 12's on a ct, which is very dooable. Considering a friend of mine with a slightly modded (intake, full exhaust, chip) M3 ran a 13.3 on the strip. This is applies because from a stop,in 1st he kicks my ass manily beacause of the ct drop off at 5-5500 rpms. From a...
  14. C

    Na cam dyno

    Quote: Originally Posted by DJVmk3 Well, i swapped to N/A cams today. I did 3 pulls on the dyno before the swap, swaped them, drove around the block a few times to get warmed up, and did three more pulls. attached is the chart. Red pull is stock turbo cams, blue is N/A cams. They speak for...
  15. C

    Na cam dyno

    Found this on the forum tonight, havent seen it on here so....http://supraforums.com/forum/showthread.php?t=102525&page=1&pp=25&highlight=N%252
  16. C

    8sec 7m..

    dont know if anyone has seen this but.... http://cjsupra.kendra.com/MkIIIRace.html
  17. C

    Stretch's Digidash thread

    Wow, this is freaking insane. Im glad someone is doing this! Just came across it today. Dude when either of you finish I want one made. I bought a digi dash last year before i bought my supra, but then the bad news about the RHD only came about. My digi is still sitting in my closet and im...
  18. C

    What should I do with these rods?

    http://suprastore.com/enblpa.html
  19. C

    machine shops

    i was thinking of going a little bigger, like a .20 over. but dont want to if i dont have to. this is my first engine rebuild.
  20. C

    Bov

    I want one that has that whistle pitch. Im going to be pushing around 650 when im done with the rebuild. Not planning on going any higher than 700 with this project. Any suggestions, how many would I need?
Top Bottom