Search results

Yep. And if it makes "no" oil pressure, I'd bet on the sending unit being to blame. No, you can't lift it high enough, drop the member. Actually, if it makes no pressure, pull the engine.

Uhm, 7K is plenty to get the power you want. You're going to need perfect engine management. Get an AEM. 2K later and you've got 5K to get your motor, fueling needs and boost needs up to par. You'll need another 2K into the shortblock, and at least 1K in the head for a solid foundation upon...

Where are you getting a billet cps cap?

Nor does the S-afc ;)

IT's a big multipin connector not hooked up to anything. The online TEWD doesn't have the diagram...

Cool, those match my pics perfectly, so We've got the verbal and visual covered. ;)

Nice read Mike, I'll link away to them's who need it ;)

I gave you some ;)

You can just give it to me ;)

Jon, colors are in the TEWD. There's the pics of all wires for a 90 ecu, I have the 89 tewd at home, but it's late 89, so it should be the same, the only difference would be pre 89 harnesses..

HA! Great post Shaeff

Uhm, those come with 6 iridium plugs, so they're quite cheap.

Very nice car Jeff. You should be proud.

We're down, get a date.

I'm gonna go check the specs on the rotary inline girder... I'm retarded.

Correct. Also Compressor trim is the same concept, but reverse of turbine trim, and Compressor trims are always labled in a numbered trim, referring to the area ratio. No stages, lmnop, etc...

True, but all things aside, if it's a leaky pan, otherwise a good strong engine, I think pulling it is a waiste of energy. I used to be a pull it every weekend guy, but lately, dropping the K-member has been my method of choice. ;)

OK. If the BPV is sucking air through it,,, The throttle plate isn't SEALING. It doesn't mean it's cracked open, it just means it's dirty, chipped, etc. When you unplugged the valve, the air being sucked through it was no longer metered, so the TCCS removed the fuel needed to maintain the...

Adam... It's not easier to pull the engine, Heidi and I can have the pan off in about 40 mins now, it takes that long just to get the engine ready to come out...

Can you say Detonation?