Search results

http://maps.google.com/maps?ie=UTF8&q=73+Old+Dublin+Pike+Doylestown,+PA++18901-2491&ll=40.323293,-75.128717&spn=0.00508,0.009356&t=h&z=17 direction^ arrow is incorrect, its on main st. right by the burger kind, in the shopping strip with Genardi's (however you spell is). Its in the...

I need some rust removed via grinder and filled back in with bondo or whatever you use. MAACO estimated 3.5hrs + $75 (breakdown is 3 hours on back quarter in pic and .5hr on spots) in supplys and materials...i think it can be done better, cheaper and quicker if the person knew what they were...

I just noticed tonight as my car stalled out the 2nd time, my AFM sensor readings at idle were 3Hz. This tells me the AFM is not registering at all at closed throttle. However, the instant I apply any throttle it registers just fine. I've also noticed that the 'dead zone' is intermitten...

im an idiot /thread

Just curious what most people are running spacer wise with there SS ebay manifolds. I'm going Master power T66 or close to, just need an idea of how big of a spacer i'd need.

I find it impossible to remove that black foot rest on the driver side floor in order to get the kick panel off covering all the electrical components. The screws are rusted as normal and flush mount. Any suggestions on removal in order to get that int. piece off? The one on my other car i...

Now i've been driving around awhile now in the new car. All parts are from my previous ride except LSD keep in mind. Its a violent stop and go rock. I can replicate it whenever I slow down (OFF the gas) in any gear below lets say 1500 RPM, the car jerks forward suddenly grabs pulls back the...

Switched out my broken door handle for the one off my burned car. I'm now having an issue with the alarm not disarming however it will arm fine. My question is, what specifically should I be looking for here for next time i take off the door panel, i only remember removing the one switch for the...

I have a pre89, so there are 87546549845 different temp sensors. I got my replacement temp sender for my aftermarket water temp gauge and want to put it in one of the existing holes on the engine. My question in which sensor can i pull and which sensor can i splice into that will output the...

I'm in the process of rewiring my ZT2 WB. My stock 02 sensor connector was melted so I figured I'd just use this function, plus it allows me to change the ECU optimal AFR ratio to above 14.7 to save some gas. The issue is I'm not sure whether to cut into the Vf signal or Ox signal to simulate...

I was going to upgrade the oil cooler. My question is what is a good GVW rating to use? I was thinking 12000, but how about 18000 or up? Im not sure what the stock system does so I have nothing to base it on. FTR, i'm sure this has been covered but there are so many results in a search, i...

Well when I sent out all 12 of my injectors i had intentions to see how the results compared. Ran into some problems: -2 of the RC's plastic clips were too badly melted and could not be removed to be tested, so now i have 4 left -2 of the 'good ones' were LOST...

Just curious if anyone tried this? For those not good with abbreviations: Greddy Profec B Spec II + Perrin Electronic boost control solenoid http://www.perrinperformance.com/products/show/64/Boost-Control-Solenoid?category=37&model=22 Why? My solenoid was fried in the fire and...

Was browsing through ebay when i stumbled across the 2jz v-band downpipe. They are nice, not made of the best steel, only 304, but cheap to make up for it. I was curious if the MKIII has enough clearance for one with an aftermarket turbo? For shits and giggles we'll assume you're using an...

So i've had an ad up on cars.com for awhile now (maybe since November). I received a call last night from someone claiming to be from cars.com telling me my ad was cancelled. When i asked why she couldn't tell me. She said I had to be transferred to another dept. so i said ok. They put me on...

Attention: Pics/setups are still needed along with reviews! I'm sure other setups are missing as well. PLEASE REVIEW, even if you don't have pictures up! Foreword: This is a thread in process/its early stages. I just hope people will contribute. This is what I've gathered so far but its...

I just contacted Aeromotive in regaurds to my AFPR being fried in the fire. The fire destroyed the fabric around the diaphram. As of a couple days ago, they now offer a rebuild kit which includes a new diaphram. Prior to a couple days ago you had to send the unit back to aeromotive and wait...

I'm confused on this matter and i need clarification. Things I know: Tockico Illuminas are TEMS compatible Billsteins are adjustable in height but are not TEMS compatible My car needs a new suspension setup Now I have a few questions here: 1. How much do the adjustable billsteins...

*****Links FIXED***** In light of recent success with Ghosts of August, I was asked to upload my brother's old CD. Its about 7 years old, the band broke up shortly after it was released. I just find it a shame to let such a good cd go unheard. I've listened to this cd probably more than...

*Ends Sunday June 1 midnight* You can vote once everyday My brother's new band just made it into the finals for a local competition in Detroit (only 5 bands made it). Up for grabs is $10,000 and studio time! You can listen to the songs on the website posted, if you scroll down a little bit...