Search results

Messed around with my ISC tonight, just changed the gasket trying to fix my high idle. I start up the car and notice its acting very funny. Check for codes just in case, 12 comes up, RPM signal Didn't find much info on it but came across the option of moving around the CPS wires. Checked...

I simply cannot rid myself of this high idle. Its hovering around 1000RPM. If i adjust the timing via CPS i can get it as low as 730RPM ish but then my timing is WAAAY off, well after (clockwise) the 0* TDC mark on the crank pulley. At 10* its around 1050RPM. Yes, the ECU terminals are...

Cliff notes, i got the fuck beat out of me for no reason at a bar. There are pics on this thread on page 2 i think. I've talked to others about this, this isn't the first time it happened for no reason (according to others i don't know). Just tonight my good friend told me HIS friend was in the...

Finally got rid of 51. I adjusted the TPS old school method. Closed throttle my SAFCII is reading 0.560V. If i move even to .565 i will get 51 again. Problem is when i hit full throttle its only to to 3.6XX volts. So one, the safc isn't reading 100% throttle and two, how does the ECU...

6+K miles on new engine and rod knock?? Now i've heard rod knock before from my brothers supra and his was waaaaay worse. I've heard the tapping before, i noticed it got louder as i changed the timing. Now i changed the timing last night to more of a stock setting compared to where its been...

I've been dealing with a high idle for a loooong while now. Its now preventing me from properly timing the ignition so i really need to focus on it. CEL: 51 Read up on it. For awhile i didn't think it was my TPS since it was new and read proper voltage when i first installed it. So just...

I relocated the resevoir finally over christmas break. I matched the hose size lines however wanted to give it a bit cleaner or an install so i used a few 90* elbows to move it over to where the engine bay fuse box is. It sprung a leak and i quickly as i could i took off the PS belt to prevent...

So i just got this potentially good idea for a new thread....i think its original i've never seen it before? Anyway, It went well in another forum im in but there is quite the variety of cars there so opinions are very (can't think of the word i want here) lets just say thinking outside of the...

Yes i have a high idle, around 1.1K Yes, i should fix it, im stiiiiiiiill working on it Yes, ive tried, i've had it since the rebuild 6K miles ago and 6months ago. Nothing i've fixed along the way fixed it even when i focused on the problem. Yes, i've resistance checked the ISC Yes...

So i came to discover this morning right before i left for class almost ALL of my change and left over bolts and such i keep in the coin tray by the shifter were taken :aigo: . Thanks god nothing else was. My suspicions lead me to believe this was done at the gym at my school. My question...

Ever wonder why computers typically so down over time? Yes, most people ignorantly add on all that useless startup crap and lose their memory, that is the biggest factor for most (get more memory will make a world of difference and its CHEAP now). Anyway, im thinking more mechanical...

I've been reading up on the forum about the marlincrawler.com shifter bushings. I've read basically they are very difficult to install....well the seat is. I ordered some because my shifter has between 3-4" of left->right play when in gear :nono: so these should help a lot (so i read). So...

Well first off i want to clarify i searched garrett t-67 and no results came up probably cause default search voids things like "t-67". Idon't know much about turbos just have a rough idea about how they work and such and the popular choices. No details really yet. But First i wanted to know...

Edit: forget it, figured it out

Keep in mind, this write up was for camry owners. I forgot all about it until today but you should be able retro fit this to our cars using the same basic ideas. It was written by a guy who really knows his stuff. He is not only an mkiv supra owner but has a 450+ (to my knowledge) HP '94...

First off thanks for pointing this issue out to those who helped...even if it may have been frustrating for you :biglaugh: . Here's why it was happening: I don't know why the builder decided to do this but he had some type of reasoning behind it since he supposedly builds 7m's all the...

I've googled and googled some more but nothing is coming up. I don't have a part number either which doesnt help. Toyota has them, but they want $55!!!!! You can get a complete exhaust gasket set for $6x dollars there?? Anyway, that gasket should not cost that much...anyone know where i can get...

So a number of yo were telling me i may have a thermostat issue because my water temps run so cold. It occured to me this may not be so. I no longer have the original water temp sensor as i run a water temp gauge from autometer, so its sensor took its place. Now both the OEM gauge and autometer...

FYI, i pretty much copy and pasted this from another forum i belong to, just thought i'd share. I've never done a project to this extent before...A LOT of hard work. This project is basically adding my old car system which i miss oh so much. I got a Poineer Premier DEHP690UB for Xmas so i...

I need to cut into the carpet for a system install im doing. My only concern is fraying. I was wondering what people have used to prevent this while still maintaining looks/appeal.