Search results

The Factory adjustment is fine as long as the Car is not set to low. otherwise you will have to much negative Camber no matter what unless you start changing other things. I do not recall seeing a set for the Supra that does have that.

sorry to hear that Tyler, i'm sure with a bit of time you will figure it out

Love them and the look of the craftmanship seems great, Did you actually assemble them yourself as well or did you get the components and have a pace do it? where / how did you get PCB board that were curved like that?

The Clutch for the 7M and 1J is the same, same goes for the Tranny both are a R154 Ninja Edit, the Fly wheel and bell housing is different

ORC is relitivly new to the Clutch Market, they have got in in the last couple of years and really have broken some good ground with their stuff, i have only ever heard good about them, even with them being a new company

i have used the NGK Iridiums and the Platinums, platinum lasers which came in my Clip, the Lasers so far have had the nicest result i think but the Iridiums i think were on the verge of being to hot. Maybe if you go 1 level colder they would be ok

ya deffinatly check your grounds and make sure you are getting good voltage to your ECU, Also if your fuel pump is running constantly then i would say that there is something miss wired somewhere. I would start with that problem. both could be related.

http://shizzville.com/rocket-moped

Well it's going into Toyota tomorrow for an estimate, for the insurance company

i also put up some info in my build thread, some of the capacitors in the ECU are Polarity sensitive so you need to make sure you are putting them back in the right way around. here is the info i got from my guy There was a total of aprox two dozen changed. here are the different types of...

you have the numbers right for those things

http://www.supramania.com/forums/showthread.php?t=35398

Well if Toyota does it my insurance is probably going to pay for it, they know how to charge people here...lol If it's me then i will do what ever i can.

Well i have had a rid in Colie Car with the SS and a few other suspension mods and they ride pretty nice for street use. Someone around here had a very good read though about Shocks and what suprises you find out there as well as a nice list of some of the better stuff to go with, they also...

that was just funny, just sad that so much of it is true ...lol

OHHHHH this Just Clicked The Lady that backed into me the other day in the parking lot here at my Work hit me in that area Right where the front Passenger wheel is :( :( i am guessing she caused more damage then i thought.

thanks for the advise :) i hope the Spindle is ok? i could posibly pull the ones off of my front clip as a temp replacment if anything just for the moment

better question yet, i breifed over this but figure it was not covered, what MAP sensor are you running now? 2J map or 1J map, could posibly be part of the problem your seeing

Well a new problem has popped up, i think it is a bad wheel bearing, just thought i would run it up the flag pole to see what other people think, I hear a high pitched grinding like noise from the front passenger side Wheel, it's not constant and comes and goes, some times worse then...

your Lucky Tyler i think i can help you