Search results

Hey guys, i bought a torque freaks kit a long time ago, and this fitting has rusted out on me. It's used for the washer bottle reservoir... anyone know where I could find something similar to replace it? Here's some pics...

Depends on your goals, if you are trying to hit 400 hp on that 57, you'll need a lot of supporting mods. For instance my stock 2jz twins have a 4" intercooler, 3" intercooler pipes and 3" exhaust with a cat and I put down 430 whp and 435 tq. Pretty impressive for JDM cams, and JDM twins. If...

Thanks guys, something else to add to the damn list of things to do...

Hi All, I'm going to revive this again... I have a different problem that I cannot figure out how to resolve. I have front to back slop on my driver's door meaning I can push the front down a bit and life it up same on the back.. What would cause this? I've tried several times to figure it out...

See here's the thing, we are all old now... Most of us were early 20's and we spent boat loads of money on them though our early-late 20-30's then most of us got hitched somewhere in between and life got in the way. Many dropped out far before us and there are a few old names that still remain...

Man you won';t believe how much trouble i'm having to have some numb nuts machine these rotors.

i've always had low voltage like 11.x volts when at idle until i rev it up. Just though ti was normal because it happened on 7m/1j/2j

So are you sure the stock doesn't have extra metal somewhere to compensate?

Just got my rotors's and calipers, need to find a machine shop now, also if I drill out the hole for the star wheel will that affect balance?

um, i would start with maybe getting a TIS account to look up the EWD to see where these wires go or find a cres tsrm with the EWD so you can trace them.

ok, basically if I was to get a rotor that is 16MM bigger IE 350z rotors, is there clearance, some how form the pictures I highly doubt it. But the 370Z sport break package almost matches the STI brembo calipers for thickness and all sorts of other things so it for sure would work, but I don't...

Ok done a lot of reading on this, I have my EVO calipers on the way.. Can someone tell me if how much clearance there is from the top of the STI rotor to the caliper? Is there an extra 16 MM of clearance?

So I did some cals against some diff setups to see what the break bias would be. Check it out, I think i'm going to jump on this ban wagon as well, to even out my cobra breaks in the front and give my rear end a little more bite as it's pretty lacking

Well, what i have is larger than normal tires.. For instance i have 275/45/18 on the rear which fills the wheel gap and it never rubs, I have less than 1 finger of gap... However, on the front, I have 245/45/18's as well looks nice and fills the gap but rubs everything and the big mistake is I...

How are you boys not rubbing the hell out of your fender liners and mashing up your fenders running super low? I don't like a car that's bouncy so I keep my coils pretty soft, but if I make the wheel gap flush with the fender i rub absolutely everything. What are you guys doing or is it...

rock auto usually had stuff like that too

So here's my experience 1-5 5 being higest Stop Noise Dusting HAWK HP+ on mustang cobra breaks - Very good stop power, a little grabby, noisy as hell, so bad that I'm in fact removing them for the sake of my ears. (strange because the pads on my mk4 didn't squeal nearly as bad, maybe...

jthat looks like one of my old k26's form my twin turbo 1jz kit way back

Yes but in black, and GOOD speaker mounts, for the stock locations like 6 1/2 which can produce base out of the enclosure. Same with the back..... New way to seal the targa... diffrent seals or something. new material Aluminum front and rear subframe!

I've never used E85, and I'm just regurgitating what I've read but it make complete sense that if you use your tanks on at least a monthly biases it's nothing to worry about. Now that being said, I would recommend the Zietronix E85 analyzer, so you always know whats going on for tunes. Finally...