Search results

Hi All, 2 Questions... #1 what did you hook up the Headlight idle up "LP" from the 7M flying lead harness? Does this go to ELS as well as the defogger? I figure both will cause an idle up condition and they are both 12V grounded at the ECU according to the TEWD. Correct me if i'm wrong...

yes my bad i mean E10 34 ;) updated

Not that anyone cares now with the influx of cheap intercoolers. I think many underestimated what the stock intercooler could do back in the day and how good it was in relation to all the intercoolers that were out there. http://www.gusmahon.org/html/cooler%20test.htm No virtually all bar...

Could you share the bearing part numbers? Also do you have more details on the adapter for the speedo? I want to install a 3.5 rear gear on my R154 to aid my highway speeds. I'm running stock twins and the super low TQ and boost from sequential is making a very jerky highway drive because of...

Hrm, sorry to bring this up from the dead, I'm about to have the Wier Max performance kit added to my LSD, but now seeing this I'd MUCH rather a torsen, as I do very limited drag racing in my mk3 and more less I love LOVE LOVE the way torsens drive day to day. Does the FRS Torsen unit work in...

So I talked to Jason here's an update. He's using an Auto ring and pinion gear to lower the final drive. Sorced from wier performace its the 3.55 gear set I believe on tubo autos. R154 plate adapter allows you use JZ bell hosuing and bolt it to the CD009 after you cut off the original bell...

wow, that is really quite the build there. Very impressive!! Where are you finding all these part numbers, that alone consumes more time then the restore a lot of the times! Getting factory vac line in a roll would be very impressive, this is something that has eluded me for MANY years...

There isn't such a thing as a base map since it's a piggy back... You need to tune based on what you have, adding or removing fuel/timing ect.

Hi All, I'm visiting this after several years of not caring because of living in Canada. Now that i'm in California, is not a luxury, it's a must haha. ** update** B1 13 from ac amp-> to E10 34. What does this do? B1 13 from defogger idle up signal -> E10 15. What do the two pressure...

Hi guys, if I need connectors for the mk3 does anyone know where i can get the part numbers for these? http://www.supraforums.com/forum/showthread.php?985977-Finding-Part-numbers-for-MK3-connectors. is what im looking for.

My first dyno was 256 whp with hks doe pipe and 65mm cat back with a cat and k&n filter 7-10 psi on mbc

Put solid motor mounts in, and keep the 7m as long as I did.

how much power does the RA62 hold? Curious why we have never used it in any other platforms.

so, how much massaging are we talking about when you say slight?

Great spam batman! Even dug up this super old tread

Well I did the bypass mod for the start as well and I still crank walked the 1jz. So an update on my clutch, I haven't had time to adjust it, I'm sure there is air in there but that shouldn't affect overall holding capacity of my clutch. I'm pretty sure that I'm making too much power for my...

If you add the pressure sensor from the e01 via the option port, you can add fuel based on boost pressure. That along with the option to use the additional injection map allows you to add more fuel by extending the pulse width (keeping The injector open longer) however, it will still hit factory...

Running SPS 610C and 610 coax's. Components are in the front with 91 pods. I 3d printed a test pod for the tweeter which fits on the little triangle.. Seems to work great, just need to make another. I then installed the Coax speakers in the C7 fiberglass pod for the rear panels. I am running...

Just it's adjustable.. The strangest thing happens with this clutch. I always though it had air in my slave, because when the clutch got warmer/hot the engagement point always moved way high. when it's cold it engages mid way, and slips really really nice. When hot, it doesn't slip at all and...

I know there is a site with the TSRM translated.. This has the EWD for JZA70. Google is your friend... http://www.supra.co.nz/2013/87tsrm/87index.html