Search results

this -

I read it as he meant the cold feet about the machinist :dunno:

martin - that second one is mine not drjones, thanks for citing source :rolleyes: http://www.supramania.com/forums/showthread.php?t=86795 Only two signals are severed – KS (AFM) and SPD (speed) The other signals are only tapped some more info: • http://tinyurl.com/qdpjvt...

+1 Road House RIP

Wow, the versions of ARP stud instruction sheets are varied. I saved this one, I thought from jdub, that states 81 ft/lb. Guess the best advice is use the one that comes with your studs, but buying second hand could be WAG.

Something I saw when tuning with the Rebic as opposed to stock tccs, safr & neo; with the Rebic's ability to control injection it cools EGT at WOT - These are all 3rd gear pulls with comparable boost level. ~830° in the others, ~770° in the Rebic The instructions drjones had...

^Prevention would be better.

If you have an electronic boost controller, just remove power to the control unit. The solenoid will be default to stock routing and only achieve stock boost. If you have upgraded turbo and such the base boost level will be higher than oem stock level, but they won't have access to your hi...

Has anyone else experienced this? Does anyone have the ability to duplicate the test? Possibly with same electric gauge but more hopefully same sensor placement if possible (csi banjo position and afpr position). If not just test first one then other (electric/mechanical) in any...

If your KS was unplugged when you got it and you have just now been able to check it; try clearing the codes, now that you have the ks plugged in, and see if it comes back. To Clear codes - Pull EFI fuse for 30 seconds.

I was thinking my max, efficient, level would be 14~18psi.

At least I know I have some growing room. I don't think my tires can hold that right now :D

Bookmark that site. It has the TSRM, THE repair manual for the supra :)

What would be the efficiency limit of a 50trim ct26. I had read that a stock ct reaches it efficiency level at ~14-15psi. The 50trim is not that huge an upgrade from stock.

http://gallery.sanitylapse.com/v/supra/Foglight+Rewire/

Do some searching. It's all over the forum: http://www.cygnusx1.net/Supra/TechTips/vacuum_hose.aspx

http://www.supramania.com/forums/showthread.php?t=52954

I finally installed all my performance mods. I've had my afpr and mkiv fp sitting on the shelf for a few years. Things are looking good, I don't think I have to worry about the distortion in my egt signal in a specific log. I'll up my hi boost to 14 and lean the Rebic out to mid to low 11...

The duration with distortion is about 5 seconds. No, i don't have a way to monitor timing.

Thanks for the replies. I'm thinking some kind of noise or signal distortion. I've taken over 80 minutes of logs over the last few days, to and from work normal driving, and this is the first time I've seen this show up. tissimo - What are the conditions/cause/ramifications of uneven burn at...