Search results

Thanks guys, this project seems to just soak up cash, I'm not sure why! The new skin with shipping was $280, came in a "Genuine Toyota Parts" box.

I love ebay, bid on two of the same items hoping to just get one and end up with both!! Now I have three 89+ front bumpers; one brand new one, one original that came on the car (with 2" reciever hitch hole), one used one off of ebay. Brand new Factory Toyota Bumper skin Used front...

I don't really remember how much it cost but it was over $150 for the AN-12 stuff (bought a bunch of other AN-10, -8 fittings and hose for my oil system at the same time). The low coolent light is in the overflow bottle, fill it and the light should go out; if not then the float may be stuck...

Front: http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?Figure=4708&Page=1 Rear: http://www.cygnusx1.net/Supra/Library/EPC/291420/catalog.aspx?Figure=4708&Page=2

Is it gurgling out or is it rushing out? If it is just overflowing a little it will stop once the air bubble pushes its way through the system. Make sure your radiator cap is higher than the hose at the back of the head, it takes a pretty steep driveway. If it rushes out when you start the...

I saw one on "Cheaters" it was a red turbo in great shape, with a flaming gay couple fighting next to it, then the mistress guy drives off in it. Funny as shit!!

The market demand for 7m Al rods could be counted on one hand, so it's probably a custom job. Search for aluminum connecting rods on google and contact some of the Domestic market vendors to see if they can make them, price, etc . . . Big names in the Domestic market: Childs+Albert, Manley...

Yea right, next you'll tell me I've got the Turbo A Duct in the wrong place, and that the return-line from the AFR doesn't go directly into #4 cylinder, noobee!!:wuteva: :wuteva: Just kidding;)

Ron R. made mine also. Pardon the mess, currently under construction. Once pipes are made it's getting fully polished.

Semper Fi! Onefstsupra you have mail. And thanks for looking out for us Vets. Matt

Welcome TJ, I see you are from the Reno area, I'm planning on relocating from the Boulder CO area in the Spring to the Carson Valley area (we have a couple of a acres to build on). Anyway, welcome to the forums, Matt

I didn't really think is was my car. Don started his own shop, and is doing pretty good based on the number of cars he has sitting is his shop. BigTsetter's 1jz is there along with another mkIII, a few mk4s and a bunch of DSMs.

Sweet looking paint, is that Saddleback CC driving range in the other post? Matt

Running them, also no issues.

Rot, I'm the Chic-fil-a guy, my name is Matt and I remember talking to you. My car is down in Denver at Don Walker's shop (http://www.hrd-performance.com/) getting a Ron R manifold, GTR IC, all stainless pipes, Hayabusa coil on plug system, MSD4, HKS SSQV, exhaust-vented PVC system, RC 780cc...

Here, see if this helps: http://www.suprasport.com/BOSS-Turbo-Pictures_ep_41-1.html Matt

Within the last 2 weeks: Ron R Short Runner Manifold, Q45 throttle body, mkiv throttle cable. atlernator relocation bracket 780 RC injectors GTR Intercooler, t-bolt clamps, 4-ply couplers. 3" custom stainless steel hard pipes 4" custom stainless steel intake pipe HKS SSQV MSD-4 Hayabusa...

I took the idea of one of those NAPA radiator flush&fill kits with the plastic splice in T and made it out of AN fittings. The final hose had to be shortened and the clamp cover that goes onto the head had to be removed inorder to get the hose on (it was installed while the engine was out, but...

I had the same problem with my Ross pistons, I needed to replace 2-3 of them, but couldn't find anyone to sell me a split set. When I called Ross they wanted nearly as much for three as it would cost to replace all of them. I ended up boring to .040 and going with weisco (they are 9:1 comp but I...

I just finished installing a completely new full flow oil system. I went with an N/A stud, Canton remote filter adapter, remote filter mount (perma cool:PRM-1791) w/ Canton Mecca 6.25 spin on filter (I'll use a big Ford truck filter during break-in), 180deg B&M thermostat (BMM-70259) , earls...