Search results

I was wondering if all model years had the same rubbery radio trim, or did the later years have more of a plastic trim? thanks.

is it just your dome lights or the inside door lights also?

So, I don't have a wideband, I tuned it using the diagnostic port and a multimeter, basically getting it to STOICH through out the powerband. I was thinking that the CSI could be stuck open with it plugged in. By me not having it plugged in I was thinking I could be running lean. I will...

alright, mods are stock ct-26 at 12psi, 3" turbo back exhaust no cat, hard pipes, fmic, lex afm, afc neo, afpr, walbro 255lph, n/a swapped turbo. the problem i was having was some stuttering under boost usually around 10psi depending on throttle and rpms. i had someone tail me and watch...

so thanks for the link that helps out a lot. IJ; waiting for the update, thanks does anyone know where to find a compressor map for a sp67, looked and looked but couldnt find one.

anybody?

So i have been researching through previous posts, and i cant seem to find exactly what i am looking for. I am wanting to get about 600-650hp at around 25-28psi with water/meth injection, forged rods, pistons +.020, completely ported ect., 750cc rc's, ffim, 90mm throttlebody, 3in. turbo back...

So i have been researching through previous posts, and i cant seem to find exactly what i am looking for. I am wanting to get about 600-650hp at around 25-28psi with water/meth injection, forged rods, pistons +.020, completely ported ect., 750cc rc's, ffim, 90mm throttlebody, 3in. turbo back...

http://www.caswellplating.com/buffs/buffman.htm

just finished painting the cloth and carpet in mine, here is the thread with pics http://www.supramania.com/forums/showthread.php?t=76780

great:ugh:, well i guess i will be going with the rit a little sooner then expected.

i'll probably try the rit next time i do it and make it darker. the grey color in the first two pictures was the original color.

i might end up spraying it again at some point but for now i am going to leave it be, i am just happy that doesnt look like ass anymore. as for it being uneven, there is nothing i can do for it, it changes shade as the fabric is moved like suede does.

I recently tore apart my interior and used the duplicolor vinyl and fabric paint to change all of the fabric to black. I think it came out pretty nice, it was slightly rough at first but I brushed all of the fabric with a hard bristle hair brush and it is almost back to the normal feel of the...

i had to change out the rear end, it was costing too much for gas, i checked the engine plaque and it says w58, maybe someone changed it out, i have been playing around with calculations, tire size diff ratio, ect. and it kinda seems like i have the w57, the only thing that is different on them...

well it was in 5th gear, for some reason my 86.5 had a 4.556:1 ratio differential, that doesnt account for me redlining at 120 though, i am thinking someone might have regeared my tranny before i bought it, or maybe it came with the w57 transmission having a .83:1 5th gear ratio, i am going to...

120mph, felt like i was about to redline didnt really want to look at rpms though, 4.3 lsd, 245/40/18's, car felt stable though.

Here's mine, the bottom of the bumper is a little warped though, sorry.

here is a picture my car right after painting(not lowered), also one lowered, and actually clean but the sun is glaring up the picture, and then one of it lowered, kinda dirty and wet(it was raining)

rsr race springs, stock struts, 245/40/18 front, 275/40/18 rear. I also have a 9/16th inch spacer in the rear so the tires arent rubbing, so i guess drop the rear about a half an inch and there you go.