Search results

Is the ignitor their on the harness ? If not that porbly the ingnitor My harness is hanging on the wall. Ill go look

If you order the dm kit find some good mls gaskets don't use the supplied paper ones. Also take time ti file the flanges flat. I road in mrk3tattos supra with a dm kit in it he is running the 67 divied ar70 and his car spools like crazy for that size of turbo. I belive he is running 20psi with...

I hate this thread. Its making me rethink my entire build plan..f***!

For sure. Twins off while out of car.. But I made 22psi on my 440s and sfac.and I made 416 at 20psi on a smaller turbo I don't know the spec of your turbo but you should be able to get. To 400

Ill be god dammed it is . i read it and my brain did not .. I seen 2j piston into a 1j block.

I don't think you can use the 2j rods. In a 1j block. The 2j block is an inch taller. And the stroke is way to long for the 1j block. You have to use 1j rods. And 2j gte pistons. Like hvyman

Yes they fit. But the compredion ratios may be different. The cp piston I have in my block are 9 to1 but 10to1 in a 2j.

Yes the maifold is a bitch.. as for the turbo. I have been running a used precision 6262 for 9 thousand miles at 22psi+ with out a single issue.. was you turbo new when you bought it? And were you suppling sufficent oil to it. No restrictor fittings right ? Also just a thought. Something I...

Your on the right track.. cut the studes down. And use the stock nut.. than you have to pull header out and thread bolt on at the same time as you put the header to the head. It a real sob.. or you can break out the tourch and dent the header some more. Just keep going. The china headers are a...

Any codes ? Water temp sensor will make no start. Same with map as far as I know. Also does the car have adjustable cam gears. Make sure timing is right. And as far as elctronics go they work great .. and than they don't work. That's why their is never a warrenty on electrical parts. Also...

11.7. On pump at 22 psi. And 11.9 on 110 at 24 psi. That's in 3rd gear. 4th is a little richer. Like 11.4 and on 110 its about 11.7 at 24. And in 5th I get fuel cut at about 17psi. But no cut in any other gear with the sfac and no fuel cut defencer

http://www.supramania.com/forums/showthread.php?13848-1ggte(u)-information In the stickys

O u have a pic of you engin bay I would like to see your turbo set up ?

I was running 22psi on pump and 24 on 110 with no meth. And had no issues with knock at all.

Yeah sorry about that my phone tweeked on that reply I delted the post. But it did not remove. Sorry. I was going to say in it to buy a gm 3 bar. With out the sfac to trick the map anymore. The stock map is no good to 20psi

Maybe its sticking.. go buy a el cheapo from the parts store just to see if the gague is bad. .

Is it a electric unit?. May have a faulty sensor inside of it. My aem had that issue. I had to sen it back they give me a new one

Worst caSe I ride with you

Yes outletmall is exit 82. And their is a big parkinglot across from the walmart supercenter with a tacodelmar on exit 79 also a starbucks their and a applebees And their is a e85station across the street;).. exit 79 has my vote if their is a vote