Search results

hi, i jst measured my oil pump i got out of a 7mgte block. i measured it per tsrm .051mm body clearance TSRM MAX-0.2mm .457mm backlash TSRM MAX-0.9mm side clearance (didnt know how to measure that) but i noticed the drive shaft sits a bit higher than the driven gear, and it has...

currently i have a Optima battery and i tested it one day it shows 1000cca out of 800, then the next day i test it it says bad battery and shows 275/800 so i know its draining overnight or something. i just checked my fuses without the key in the ignition at the driver foot rest area, and these...

hey , i need some help wiring my gauges so that they reach to the engine bay. i have searched and couldn't find an answer. i have a GReddy boost gauge and fuel pressure, i was just wondering, how do you wire it out to the engine bay. i have a lotec pillar and i don't have enough wires to pull...

i have a 91 supra, and when i start it after it cools down it gets hard to crank sometimes. i need to crank the key for about 3-4 seconds and the rpm gauge rises to idle, but when i start it in between short times, it starts fine, it has a optima battery which i tested and its good. 1000CA...

hey, im currently running a 3" custom exhaust, has flex and cat. is it possible to remove the flex for some piping and just leave the cat by itself? Thanks.

hi, i was just wondering, is it possible to install a FP gauge to the stock rail? i have a GReddy one, and the size is 1/8 also possible to have two temp gauges working at once? a aftermarket one and stock one. so do i need a three way splitter. Thanks.

does anyone have any pics side by side? my mechanic says the lines wont fit properly/design says the line goes from the left for the aftermarket one and the one on the car already is on the right side. anyone know what year model mine is for as well?

hi, let me introduce myself, my name is Bryan and im from Toronto,Ontario, Canada. first off i bought this car in Februrary 2008,it is a 91' supra turbo.the mods it came with are Tokico/apex springs, full 3" custom exhaust and everything else was stock. *ohh yea came with bhg of course...

anyone know how to take off the hood lifts? since it dosent fit on a usdm, the design is pretty different on the bottom. i couldn't find any info on the hood lifts, but i recently purchased a hood and it had tokico lift struts, im trying to take it off but dont bulge dosent have a metal clip...

i recently purchased a second hand lower cooleeze pipe i was wondering where those to small pipes from the top go. any help appreciated. Thanks.

hey, i am trying to do the foglight rewire for my car, i cant find the red-green wire located on the fog light wires, it has (red-black,white black, green, and green-white) which wire am i suppose to cut for red-green? (wires from left to right.) Thanks.

i recently took my supra for a drive, and when i come back i stop the car and check my engine, i open it up and see a thin layer of smoke clouding around the engine bay, but pinpoint it that it is coming near the turbo, is this a bad thing, what could be wrong?

hey, everytime i drive my car , when i play my cd player it dims with the music,sometimes when its not on it dims sometimes. is there any way to correct this? it dims lights, cluster etc.

hey im having some problems with my car car cant rev over 2.5 rpm and starts cutting untill i shift gears, when i let it coast in neutral it dies instantly. here is a video http://www.youtube.com/watch?v=UhqT-nrwgS8 anyone know why its having these whirring engine sounds its whirring every...

hey, been looking for some supra's for a while and i need some opinions. specifically MKIII Found 2 one of them has rust spots and need bodywork (minor like dents, scratches) Has Turbo, 5spd, hardtop. hes selling it for $1000 Other one has no rust, but needs some minor body work...

hey, been on the forums for a while, still trying to find a supra at the moment. live in Ontario, Canada. ne ways hi, all =)