Search results

hey, it just started with this problem, everything was working fine. but then a day ago i saw my clock light light up. i can also turn on my radio my cig light is on as well. what could cause the clock and other acc on? checked radio wiring, behind dash, ign seems ok, still can go to...

hey, ok this may come off stupid but i was just thinking about it. i have an extra port on my turbo elbow for a 02 sensor for a wideband. if i get any gauge liek a cheap a/f gauge, can i just hook it up to a o2 sensor that has one wire? P.S i did have a aem wideband but it stopped working on...

just did my pretest emissions, had a feeling i wouldent pass so i tried. these are canadian standards. idle passed all rpm 2525 LIMIT RESULT HC PPM:54 213 CO %: 0.30 0.68 NOx PPM:595 3362 yup, failed miserable i passed last year...

hey, i just installed my cps i found out when i pulled it out, the o-ring was hard and brittle, so i decided to change the o-ring, after starting it up, it still smokes, could the cps itself leak?

hey, so while doing a engine swap on my supra, the mechanic broke the heater core on the firewall on the passenger side. theres two hoses that go there, one is from the back of the head to the heater core, and then to inside to the climate control vents (or whatever) so right now i bypassed it...

hey, i took out my cps without making the engine at 0degrees, is there a way to align it back properly? or do i have to align it properly?

hey, im running max lean when i installed my 550cc and lex afm together, how come its running lean? mods are, full 3" exhaust, stock ct26, im using AEM wideband to measure A/F anyone know? Thanks fuel injectors are flow tested and good.

hey does anyone have a picture of the back of the head? i need to know where my coolent lines are suppose to go. one hose it coming out of the firewall and one is behind the head in the middle, thanks

hey im going to install my injectors and i was wondering if i needed anything else? im going to use the 440cc rubber parts on the bottom and top, am i suppose to? my injectors are RC 550CC dsoent have the rubber parts like the stock 440cc has

hey, i was wondering if anyone can give me a picture of their alternator plug or help me out if you know. i just realized that my alternator plug wires broke and i dont know the wiring order on the plug, does anyone know? Thanks

i need to know two things one of the coolant by-pass pipe thats on the turbo side in the back. where does it go?which hose connects to it? and the one thats on the back of the head in the middle sticking out over the valve covers, where does that go? thanks...

hey, i was wondering, does anyone know how to take out the dipstick tube thats stuck on the block? my other block dosent have one and i need it to come off. i tried turning it or pulling it. hasent worked. thanks

hey, i just wanted to know if the oil pressure sender is suppose to be all the way in, and if so what tool did you guys use to screw it all the way in? Thanks

hey, im currently building my bottom end and i need some pictures of the bottom end only on both sides, can anyone help me out? thanks P.S. i have some lines that i dont know where it goes, plus some other parts, thanks

hey, i was just wondering i got a bottom end gasket kit from driftmotion and it came with two orings, one small one and a large one, anyone know where these two orings go? and another thing is my harmonic dampener it dosent go all the way in is it suppose to be like that? or is it suppose...

i got it back from my machine shop when they took apart another engine, and where does it go? thanks

hey, i currently have this new problem with my car. if it just start the car and warm it up it wont blow any white smoke out, but when its on a roll going over 20kph it starts to SMOKE BAD, it smells like somethings burning, checked coolent and checked oil they are fine. recently did a mhg and...

recently i just changed my Turbo elbow, to a full 3" one and the only things i took off are upper inter cooler pipe, heat shield. before when i had the non restrictive one it use to boost up to 6-7PSI but now when i finished installing the new turbo elbow after 3krpm it dosent blow the bov. and...

hi, im currently brought my rods and pistons to my machine shop and im wondering which was the rod is suppose to be on. rod has markings: numbers on one side and dotted numbers on the other side. so...if the piston is facing forward (arrow) is the dotted numbers facing left? (reason i ask...

hey, i recently found this plug under the afm, traced it back to the coolant neck area. heres a pic, anyone know where it goes? Thanks.