Search results

cars haveing some problems its like my maf is disconected.the only code im geting is a code 31 air flow meter signal.So i cleaned it out with maf cleaner and nothing.Next i reset the ECU then let it idle for like 3-5 min tryed to do the codes again but all the cheack ENG light jsut keeps...

so how many going to the get to gether at driven concepts tomorrow

lately ive ben haveing a prob with the car starting.the just goes click clikck when you turn the key like if the battery is dead so i jumped it all good.some times when i first go out to strt it it will fire right up no prob.the prob usaly happen during the day when its hot out side hardly ever...

lately ive ben haveing a prob with the car starting.the just goes click clikck when you turn the key like if the battery is dead so i jumped it all good.some times when i first go out to strt it it will fire right up no prob.the prob usaly happen during the day when its hot out side hardly ever...

just move down here need to know where every one hangs out if there is some where if not we should get to gether.

any one ever heard of a 3040LE automatic trans or know any thing about them my trans went out and is geting rebuilt so i told the meck whos doig it its a A340e til he pulled it out a calls me to tell me its a 30-40 LE asian worner trans he thinks they come in jeep cherokis and tacomas.

well ive got an 88t auto and the trans went out today the mech working on it calls me and tells me it a 3040LE made by asian worner any one ever heard of this trans or know any thing about it

just finished 2 passes at the track tonight killed a 5.0 and a sti any way after i let the car cool down decide to leave and now the trans is not wanting to shift out of 1st its like its sliping then it shiffts. its also an auto, could the TQ converter or the trans just be hot. its macking a...

trying to find out what a VSV is? it has 2 vac lines going in to it and a conector

about 2 weeks ago car was haveing truble cranking all the stairter would do is make a click sound every time i turned the key the batt. is good 12v+ so i replaced the stairter with a new one all is well till like 3 days later same prob now it stuck at a friends house and all it does is click...

ok any over the pass few mounths ive ben geting a more and more play in me stearing wheel so i got analinment didnt fix the prob also when im macking a turn say to the right theres a little hesatation and when i go to straten out of the turn the wheel will stay slighty in the direction i just...

im trying to install an FCD and i need a ecu pin out can any help

jsut got a e manage to go in to the supra how easy is it to install and can i just plug and play or is it a pain any help would be greate.ill try to keep searching.

is there any one using a safc2 and what do they think.

heres what i got so far hks intk and 3" DP in to a 3" super dragger, lex maf, ct-26 60-1,1.4mm metel Hg and ARPs boilts, 8.5mm acell wires ngk plugs, GREEDY profect b 2 boost cont and TB timer, now i have RC 550s, FPR, wallbro 255 to put on will my HKS PFC-FCON be ok for fuel cont, And can i put...

just got the HG replaced and now i get a check eng light but the only code im geting is a 52 knck but how bad is this do i realy have to fix it or jsut live with the light

has any one used an auto meter oil psi guage and if so will the sending unit just screw right in or do i have to buy an adapter looks jsut like the stock threads but just wont go in lol. And how much of a differance will upper hard pipes make or is there any one who sells an INTk hard pipe.

the guage stoped working so i thought it was the sending unit cause when i dicon.. the wire on the unit and ground it out the guage moves just a little and holds for a sec then goes down. so i replaced tha tunit still not reading any thing theres oil in the car..

im geting a knock sensor code all i found is to check tha sensor,wiering,and ecu but i dont know where the sensor is to start checking lol

my oil pis guage stoped after HG just got fixed so replaced the oil sending unit and still nothing when i disconect the unit plug and ground it out guage moves so wires should be good now im lost.