Search results

I did stop to think about it, and ive done it. 1k at MOST for a 2jzge Use an R154 comes with the engine :puke: ing up misnformation. You neglected to look at my posts and see how ive put in my 2j without hammering the firewall. Actually I think you guys did a good job...

So its safe to assume thats the last comment from you?:icon_bigg J/K You can buy a USDM 2jzge for CHEAP. If you want to know why I think this is a good idea just do a quick search for my user ID and 2jzge. Ive explained this many times - if you are going for big HP it really is a very viable...

2jzge-T........ Its really not that expensive and will save you assloads of cash.

the birdcage just tells you if the overflow coolant bottle is low - it has nothing to do with the temp gauge.

p1/v1=p2/v2 30 PSI/4 liters = 60 PSI/2 liters 60 PSI/4 liters = 120 PSI/2 liters You can see the effect above (exaggerated) of your tire hitting a bump. Obviously, a higher pre-charge will yield higher peak pressures when the volume of the tire is reduced during extreme conditions...

Sounds good - I want to see how this works out with the stinger.

The first thing I did was pin out every wire on the harness and figure out where it goes. I have a more modified application with a 2jzge harness and a 2jzgte AEM but you should be able to figure out all the wires in one afternoon pretty easily.. If you have any questions about what a wire...

Your compressor housing as a whole looks different from my GT42.

Because ive had it for almost 10 years and refuse to sell it.

Maybe your headlight relay is sticking on. Any "custom" lighting mods?

well, since none of you have heard of it ill post a link. They say you can coat your chrome or polished alumimum with it and it wont oxidize http://www.por15.com/s.nl/it.A/id.1435/.f

My welder is a cheapass Harbor Freight 220v wire feed with gas shielding. The aluminum wire feeds great through the tube to the gun - about three feet. I thought it would be harder than it is, just get some argon....

Tires and rims are next on the list while I still have some cash! I just ordered some Sumitomo HTR Z II tires: 245/40/18 for the front and 275/40/18 for the rear. They were $451.68 shipped - not too bad. They will be mounted on a set of 18x9.5 +45mm on the back with 18x8.5 +35mm on the...

also, POR 15 makes a gas tank sealer..... You dump it in and seal the holes and rotate to coat the interior and then drain...

Anyone here ever use the Glisten PC by POR15? It sounds like a good way to coat the wheels or other shinies.....