Search results

This may or may not be directed at me, and ignorant I am not. However my engine has been running 50 psi at 2800rpms, and as high as 70psi over 5500rpms for 5 years no issue. In the winter only during cold starts the pressure goes to 125psi during start up. I believe that I have read IJ, and I...

Fubar.... dude that engine is still running minus that POS filter. HP means nothing if the pressure is low. I get up to 125psi in the winter, and the damn filter sucks. You guys can buy what ever you like. That part about one bad one is moot. If you run them at the stock pressure they may or...

They may filter well but they are cheap pieces o shit IMHO. You get what you pay for for sure. They may work under low pressure under 40 psi but high pressure causes them to break. I used it 2x. I Burst fram filters 3 times before I figured that they are just not good at High ressure. Mobile...

I used a WIX filter and that piece of shit burst under pressure also. That thing has nothing on Moblie one or K&N. You want cheap go ahead and buy cheap, but don't spread bullshit untruths about how they are apples to apples and for the price you should get the WIX. Filtering it may be ok but...

Get k&n or moblie one.....Fram bites from my personal experience. They burst under pressure. I have used fram Moblie one, and k&n, and the best construction seems to be K&N.

The 25th of October and it is on rhe drag schedule. We are offical.

That thing has a 102mm compressr exducer. That really helps.

Hello boyz and gurlz the time to post for the end of the year meet in October at Englishtown has arrived. We will go and have fun doing what we usuall do and hope for the weather to be fine. http://www.supraforums.com/forum/showthread.php?t=502375 http://www.racewaypark.com/ see schedule...

Point clarified. Again...you really cant have it both ways big power and QWIK;) spool unless you go mid turbo and nos. You get a GT4088r and that will spool faster than a gt4088 regular journal turbo.

What's Your point? Now being that I was a pioneer of the GT Turbos with blackdevilsupra what makes you think this bit of information isn't known. If you want a fast spoolling turbo then the GT4082 will out spool the GT35/ GT4088. The most power will be generated by the GT4088. I had a gt4088 on...

Dayummmmmmmmmmmn thats a wide body kit for sure. Great Job!!!!!!

The gt4088 spools fast and makes good power, people have made 540 rwhp at 20.5lbs of boost. Blackdevilsura did this years ago on a 7mgte

I reasearched those units and the Haltech E11v2 is the way to go. It is feature rich compared to the Microtech, and you don't need to send the unit back to get upraded. You can use the map sensor or an outside map sensor with out having to send the unit back to the factory. The LT12 vs the e11v2...

Get a GT4082and be amazed of the power and spool you will get. Big power FAST Spool!

Go to Garrett turbos and check turbo lesson 101 and look for flow mapping.

I have just been busy trying to complete my project, and when I am done will host more meets, but the car is not complete so I have been stagnate. Hopefully in 1-2 weeks will be kickinng off a dyno hangout meet. Gotta get tuned.....

I have the same pins in the same location in this picture, but I also ave 2 more on the corners behind the headlights near te fender. I looks as clean as the picture in this photo

why take the stock hood latch out. You will invite unwanted easy entries. I have my hood latch installed ad pins in my fiber glass hoos. I mounted mine on the outter corners near the head light twards the frnder, and also installed 2 on the inner frame where the hood first meet the head lights...

thats the way it goes

This basic question tells me this rebuild may be in trouble