Search results

if its only when u are coming to a stop its the bov that is vented to the atmosphere i have the same problem ....it runs rich cause of it...

yeah like americanjebus said keep the lines short...i also zip tied my mbc by the a/c lines.... by the way what mbc did u get?

its not too late to take it easy man...u should give that engine a break for about 1000 miles ....:3d_frown:

like mhopemk3 said stock internals can handle 400 whp anytime stock pistons can be cryoed and the stock rods prepped and 500 whp can be run anytime.....there are some members running over 500 whp with stock internals... it all depends on your setup too and a good tuning... what are your...

since we are in the topic of speed sensors and speedo cables....i recently installed a speedo cable and im 5mph more than other cars.....anybody has this problem....also noticed cruise control goes on and off when i use it....

no problem thats why we are here for... to help each other out:1zhelp:

I'm no familiar with the contour fan set up but just like any other fan set up u can keep your a/c......i would go with a 14" permacool fan rated at 2950cfm thats 450 more cfm than the dual flexalite setup.......and wire it up to a adjustable temp control switch and u should be right on the...

check with bigaaron from driftmotion he has the the clevitte bearings for the supra as a kit....talk to him he will do his best to accomodate your supras needs.....

here are the prices: pt61 = $669 pt67-pt72GTQ = $999 pt74-pt76GTS = $1099 gt4082/4088 sale extended thru dec as well at $759 these are some good prices if u ask me ...bigaaron from drift motion has the gt40 on his supra....im pesonally looking into the pt61..for my new...

if you are looking for a turbo there is a special goin on for the precision turbos..pt61=680 hp if thats your goal and its less than $700 there is a couple of other turbos as wellas a gt40...this sale is on the misc. vendors section and its goiing on until the end of the year....

like supramike said just bolt on a 57 trim ct26 with that same amount of boost and its gonna be a whole different story....by the way some 2.5 hardpipes wont hurt too...

Welcome to SM.. any questions just find the right thread and we are here to help any supra owner to the best of our ability....:1zhelp:

the 03-04 svt cobras can put down some real numbers ...last week we dynoed one here in mission, tx at sanoli performance solutions...it had a k&n dropin filter , exhaust with shop made X-pipe and a smaller supercharger pulley it dynoed at 450rwhp and 460tq with the help of a diablo chip...

:1zhelp: hey guys is there a fuse or relay for the wipers they dont work

:1zhelp: i just dropped a jdm engine on my supra and before i was hitting fuel cut at 13 psi at 2800 rpm in every gear now i barely hit 8 psi but i creeps up to 11psi by end of 3rd gear what can cause this....help Mods jdm engine w/all gaskets and seals replaced k&n fipk bic ddp full...

so 12 psi with proper mods i can achieve about 320....and about 18psi will achieve about 490 how the turbo lag on one of these turbos....i have a 7mgte...

read it but still confused....so this turbo will flow about 47 lbs/min .....right on or im i stil lost in the sauce.....

:aigo: im trying to upgrade from my ct26...i came across this garret t4...which is the compressor side has a v trim wheel with a 60 a/r and the turbine is a 58 a/r ,,,, this is the web side of the compressor map but i dont know how to read it my goal is 450-500 whp on my supra will this...

thanks everybody ill have the car checked this friday and its gonna cost me 20 dllrs to check if its low on freeon and 150 if it needs to be filled ....anybody know a cheaper place here in socal......thanks

thanks for the info ...i have a question...do you or anybody know if the 89 model has the new or old freeon