Search results

There needs to be a bit of a gap for heat expansion. The specs should have been included with the pistons, as well as ring gap. If not, call Probe and they will give you the info.

Available at any dealer, or driftmotion.

Any piggyback you use will simply translate MAP signals to frequency, in order to satisfy the stock ecu's needs. That said, fuel cut can almost always be reached with a piggyback. So, first thing I would check for is boost leaks, or exhaust leaks around the manifold nd turbine inlet.

Making fake Eagle rods would be like making fake Probe pistons...doesn't make financial sense. Not belittling Eagle rods. It's just that they're known as the 'budget' rod upgrade, and they're decent. But If anyone's going to be marketing bogus rods, I'd expect them to make counterfeit Pauters or...

Yeah, sure do. I'm at Sugarloaf and Lawrenceville hwy, maybe 4 miles from there. Message me if you need any advice/help. I'm free the next 2 days.

Allfans26- Did I already ask you what part of GA you're in? I'm in Lawrenceville. If you're nearby, you can come by and I can look over your motor, and help out if you would want.

Ok, I'm an idiot. For whatever reason, I was looking at the wrong section of the bumper. I was able to find all of the mounting points, right where they ought to be. Problem solved, and I apologize for any waste of time that I caused you folks. :)

Hmm...I don't see that on mine. I have the long section of metal that clamps the lip to the bumper, but I don't see any bracket extending out from there. I guess I'll take a few pics to post up.

All of your recent pics don't show up. At least not for me. (Once you fix this issue, I will be editing this post to say "Great work, looking good!")

Glad to hear that you got it all back together. In my experience, the most common cause of power steering leaks, is the high pressure line. I had to replace it on both of my cars. You speedo cable issue is most likely the lower(short) section. Only like $20 from the dealer.

I hear ya. To clarify, I have both covers installed under each fog light, as well as the inner fender shields. Just need a pic of exactly how the front edge of the under cover ties into the lower edge of the bumper.

As the title states, I need to see a pic of the under cover installed. Specifically, I can't see how the front edge is supposed to tie into the lower valence of the bumper. Online, it shows the part number is exactly the same for 87-92, but I don't have any mounting holes in the bumper that...

I was going to ask for a closeup of the head's coolant passages on the exhaust side, as they looked pretty chewed up. Did you verify that the head gasket's coolant seals fully surrounded the eroded sections? Otherwise, you'll just end up with an instant blown head gasket again. Great work, by...

Man, I know. I've ignored it for the whole summer. I've just got to get the motivation up to hunt down the oil burning issue its having.

Update- and hopefully one of the last: I re-upgraded my sound system. The replacement head unit from the Camry started having tapedeck issues, just like the original unit. So, I sold out, and went modern. Complete system, minus rear speakers(haven't touched them because they sound good) was...

Be aware that if you vent the aftermarket blowoff valve to the atmosphere(rather than recirculating it), you will generally encounter stumbling and stalling issues after letting off boost. That is, if you're on the stock MAF.

Thanks. Yeah, I like the oem color matching, but you can change both the button and backlight colors separately to any combination that you can imagine.

If any of you saw my other thread, I actually DID upgrade my '89 tape deck to a 2001 Camry tape/cd deck, and it was way better than the original. Problem was, the deck started going out on that one as well. And what should I expect from a 15 year old tape mechanism? Also, my system was lacking...

Ebay sells every combination of strut length and weight rating.

Try going from underneath the car. It's not that bad.