Search results

  1. hvyman

    2jzgte sandwich adapter

    It all depends where you go and who your company gets there fittings from. But there is a huge difference in quality. Xrp vs summit no conparison. The summit fittings suck. Half of them will end up leaking.
  2. hvyman

    rebuilt 7m problems on first start up

    Have you tried toyota for parts? That gasket is prolly 2$. Sounds like bad or unplugged afm.
  3. hvyman

    1JZ Swap MK3

    Steering rack mounts are different. Just use pre89 swap brackets and mounts. Or get a 89+ lhd subframe.
  4. hvyman

    Question about TTR spring rates

    Honestly your prolly better off just buying new springs. Any ttr spring is over 20years old. Eibach will make springs to what your fancy is.
  5. hvyman

    Im just curious if there's going to be a meets in SOCAl anytime soon.

    ya. I didnt make the registration to putmy car in tho.
  6. hvyman

    Im just curious if there's going to be a meets in SOCAl anytime soon.

    Toyotafest in long beach is in 2 weeks. also moved this to the cali section. there is also supraforums socal section and socalsupras.org
  7. hvyman

    Coolant gauge sensor

    It doesnt take washer and most likely wontw in flat.
  8. hvyman

    Head stud surface mods. (Totally hypothetical, don't be mad)

    There is not a lot of room to machine for a wide washer.
  9. hvyman

    Coolant gauge sensor

    Its npt or bspt threads.
  10. hvyman

    safc1 tuning problems

    No the both very basic. Cant expect the world out of it. And if you have a lex your prolly hitting its limits.
  11. hvyman

    2jzgte sandwich adapter

    3/4-16 is the thread pitch for the block and the oil filter. SO with the mocal you will need a stude for the block for the sandwhich plate. With the dm kit you dont as he has a bolt for it.
  12. hvyman

    1jzgte misfire

    You have too look closely at the caps for a clear stuff coming out and the bottom rounding. o2 sensor will NOT cause a missfire. What plugs are you running? WHat fuel pump? 12v mod?
  13. hvyman

    Fresh built R154 problem.

    If pedal to floor and trans in gear and the car is moving that points to clutch system. Could just be a bad master or slave.
  14. hvyman

    Fuel Guage not working

    Ya. The gauges are the same tho.
  15. hvyman

    Fuel Guage not working

    Could be the gauge. If you swapped clusters you can try swapping just the fuel gauge.
  16. hvyman

    couple questions regarding 2jz swap

    I wouldn't think your friend could machine you mount brackets cheaper than buying them. And your going to need to have some on hand as you will need the angle as well as the bolt spacing.
  17. hvyman

    1jzgte misfire

    Typically you can open it a tad farther manually. Not really. It might change in tone for a second but it will use another sensor in its place. You can open the Ecu and check the caps.
  18. hvyman

    The Small Questions Thread

    It shouldn't be that bad. The 35 spool down in like 3200-3500 range. 40 should be around 4k or sooner.
  19. hvyman

    Wastegates..

    YouTube open wastegate.
  20. hvyman

    Import vehicle ATF?

    You could use it if it's compatible with dexron systems. It says on the back of the bottle. I prefer to use regular dex 3 or 6 myself.