Search results

I also found this fortune in my car while I was taking the interior apart. Its not mine so it must be from the original owner. There was a date stamp that I found in the pocket behind the tems switch too.

Didn't do this today, but I did a bunch of stuff to the interior this weekend. First off I finished adding my glass break sensor to the factory alarm. I tried to add a shock sensor, but couldn't get it to work after many different attempts so I ended up just going without it.:: angry :: I...

Well I even tried buying a relay and using that the switch the shock sensor to ground when the car is off and I couldn't get that to work right either. The things that were happening with the wires did not make any sense, and I decided that I was just going to go without the shock sensor and...

My car doesn't have ABS and I bled them just like you did and it worked fine. It sounds like there is something wrong with yours somewhere.

The paint looks great. It looks very professional with the door jams and everything done.

I hate the HID thing too. They may be able to see better, but they are blinding everyone else...

Yup, I drive by it all the time.

Nice Supra! I drive the silver 87 MK3 in Madison. I think I probably drive by your car a few times each week, if it is the one I'm thinking of.

If you drill it you will probably get all kinds of metal shavings in your differential.

Well the sensor wasn't the problem. I think the problem is not getting a good ground. The yellow wire which is hooked up to the cigarette lighter is supposed to be ground when ignition is off and 12V when on. I jumped it direct to ground and the shock sensor works correctly. The problem is that...

At least its sunny there. Its been cold and snowing all day here in Alabama.

When you put it on be sure to torque it to the setting in the TSRM and then you wont have to worry about not being able to get it off again.

Well after checking some of the wires for voltages and continuity last night the alarm wouldn't arm again. I didn't change any of the wires or cut anything, was just testing them. When I got home today, I thought I would unplug the shock sensor and see if the alarm would arm. It did, and the...

This is true, I didn't think about that.

Would you be able to put the bike in the back with the back seats folded down? Then you wouldn't need to add a bike rack. You can fit quite a bit back there, I had a 30 inch tractor rim in the hatch before, but just barely...

I read last night that to reset the alarm you need to close the door without locking it and then cycle the key through the lock a few times and it worked. Now the alarm arms and everything works but the shock sensor. I had the exact same set up without the diodes and it did the same thing it...

So I finally got around to installing the sensors today and I ran into a problem... I wired the glass break sensor into the trigger wire for the hatch and hood switch and it worked perfectly but the shock sensor wouldn't work. I wired this into the trigger wire for the left and right doors. All...

Nice project. Its cool to see someone taking care of one of these instead of letting it rot away.

Cool, I wasn't sure if someone else got it before you maybe. Let us know how it turns out. Good Luck!

Did you get it? The ad says it has been deleted...