Search results

hey guys, im still having problems with my car. right now ive got no spark and my injectors are not firing at all. I had a blown cap in my ecu, i got that replaced early last week at ATS in denton. Then i found a broken wire on my harness near the connector, it was the very far bottom right red...

just have to button up a few more things, and get the caps in my ecu replaced and i think ill be good to go. does anyone on here know how to interpret a cam card? as in what i need to set the cams at on the cam gears. well heres a pic, and hopefully ill have video of it idling and running within...

i just took my mines ecu apart to check it out because of what bigaaron told me about the problem i have with my car. now im not electrically inclined at all, so i dont know if it is or not but i think i found a bad cap on one of the 3 boards. heres ones that looked good to me heres the one...

http://www.youtube.com/watch?v=49h1x-i830Q i couldnt believe this when i ran across it on youtube. i dont know if hes serious or just going for his 15 minutes of fame, but either way, what are you thinking to first actually think about that, and what are you thinking saying it on TV? look at...

being that im now gonna be machining the 5th set of 2JZ cams, just wanted to put this out to you guys out there. if you dont wanna go through trying to find a shop to machine them, i can get them done for you for a pretty good price. $100 to get them machined, and shipped back to you $130 for...

i know theres probably an old thread on this, but i dont feel like looking it up. ive met alot of the local mkiv and mkiii guys now, but if your in the dfw area just chime in, let us know where you are and what youve got. and we need to set up a meet before the year is out, ill have my car back...

i just got a set of Crower 268 intake, 276 exhaust and i know im gonna need to get springs and retainers, my question is who has the best springs for the price and strength? also, i doubt i could, but could i run these cams on the stock springs for a few weeks till i get a new set of springs...

i just had my car running about 10 mins ago, turned it off to go inside, then i decided i wanted to go drive it real quick. i go to turn it on, and nothing, just cranks with a lil sputter like its trying to fire. checked and its throwing a code 14, which i looked up and thats ignition signal...

your car is up for sale by yet another dumbass on craigslist, just if you want to give them hell for it http://losangeles.craigslist.org/lgb/car/420049008.html

well im having a problem with mine. as of about 4 days ago it stopped working. before that it worked great, but i took it out 2 days ago and noticed it wasnt pulling as hard as it had a few days earlier. i had it on my 12-13# setting and i looked at my boost gauge and i was just running...

well i thought id take a few pics of my car before i tore it down to get ready to paint. i think this is the actual first time ive posted any pics of my car on here. well heres a few specs on it Toyota HG w/ ARP studs X02 manifold T-67 Tial WG USDM 2J cams Mine's Vx-Rom ecu 2JZ...

well i just got my 1J swap running in my 87 recently and i went to go drive it today to make sure it runs ok before my friend comes over to give it a lil tune on my afc. well going out of my neighborhood (1/4 mile to the gate) i can drive it just fine, no probs, can boost fine and all. but once...

does anyone have the specs on the HKS 256 cams? found a place locally that might regrind but i have to have all the specs for it

just saw this on ebay if any of yall are interested, cuz i see threads pretty often about it http://cgi.ebay.com/ebaymotors/Downpipe-Y-Pipe-1JZGTE-1JZ-JZA70-Supra-86-92-Turbo-JDM_W0QQitemZ220074867327QQihZ012QQcategoryZ33633QQrdZ1QQcmdZViewItem

any one have the toyota part numbers for the cam seals?

anyone know if any of the 1JZ's came factory with higher compression? cuz when i pulled the head off mine, the pistons arent dished at all, they are flat top w/ 4 reliefs. i was expectin em to kinda look like the pistons from my 7M with the dish and all. just wondering

what would you guys say is the best stand-alone to run on a 1J? and who has the best prices on them? i was talking to my friend george at a local shop and he said he could wire up my car (i got a soarer harness instead of a supra harness from the dousche i bought my motor from) but for the...

anyone know of a good place to get a T4 exh housing? lookin to find one, i know the trim i need and all i just need a T4 housing

i saw on one of the 1JZ reference sites that you can use 2J cams w/ some machining. my question is what machining would need to be done to them to get them to fit the 1JZ?

ive got a set of stock 7M 440's sitting around the garage, will these work with a top feed rail for the 1J or do i need to still wire in the resistor pack