Search results

http://www.ebay.com/itm/Supra-MKIV-M...067c26&vxp=mtr So i have this manifold but i need a wastegate for it and all the 40mm or 50mm i can find are knock off parts and from what i read about wastegates the cheap ones leak or fail and can cause engine damage. what are some wastegates...

Damn i retract my statement regarding the "right now" and "production cars" and "illegal speeds" comment. im surprised i haven't had a brick with a note attached thrown threw my front window too. Also i assume the "NA grocery getter" was directed to me as well? So i own a 3'' steel ds and it...

i was thinking domestic made consumer cars and trucks with a one piece driveshaft. but if you are building a car for illegal speeds (racing) then yes you should spend the extra money on a 2 piece.

well the hx35 i was going to use is a divided housing and i was going to use a divided t4 to t3 adapter and how does the QSV operate?

cool video, im glad i dont race cars.....lol so did i mention i have a steel 3'' one piece with standard universals and that almost every consumer car/trucks right now has either one piece steel or alum and are speed limited to 155mph.

gt2027 from the sprinter vans is on a diesel 3.0L of one of my friends cars and i was just talking with him about the vnt turbos and from what i understand he has some sort of linkage too the injection pump and the turbo and it self adjusts with the bowden cable?! I became lost in the...

AH the variable turbos! I like it! what is the footprint of the HE35 (t3)? is it divided?

since where on the topic whats a good BOV and Wastegate Quality,sound,parts

steel one piece is cheaper and in my opinion its plenty enough for the supras out there being daily driven by good drivers

Since you dont race your car at 125mph for LOOONG periods of time id go with a one peice but i didnt think you were going to exceed 350-400hp? so with the hp in mind you could stay with the 2 piece and cheaply replace the carrier with a ford ranger bearing for under 25$ IF u did spin the bonded...

well money IS NOT a problem, time IS.... im still earlier in my build, just done a quick rebuild on a 2jzNA and drilled and tapped 2 oil ports on passanger side. 2.5mm mhg, and plans to get aem v2 or v1 and all the other aem,greddy sensors/actuators. just wanna beat a built v8 or bigger from a...

no idea ill look for a plant number. and typhoon its possible my ma70 sat next to yours in the yard at the plant right before they split up and got on a plane,boat train,or trailer i work at bmw and they line there cars up in a yard when there done testing/inspection and from there they go leave...

http://www.sfldrifters.com/forums/showthread.php?t=67850 I would like to recreate this

So what do turbo cars have? LAAAAAAAG well ive been very interested in mocking up a compound turbo setup to use a small and large turbo. But im lost on the pipe diameters to use and the sizing of turbos to respond with one another. like a 45mm to a 80mm turbo and what size wastagates and how...

if your looking for the cheapest route. i ran a ford ranger carrier bearing for the last 40k miles. while on the toyota DS(r154) Did you say the DS was for a W58 behind a turbo? well the input shaft will break(w58) before you ever hurt a DS if you get into the upper 400hp area. The 2 piece...

opens thread-reads-Dashes out to the car- and the number on mine is -----> 0007188

oil on windshield too, i imagine the turbo leaks

this is the last thing i want to fix before i put the supra on the road, i swapped a 1992 sc300 5spd into a 7mge 5spd 1986 supra. the car runs but if i turn A/C on the idle drops like skrillex dubstep songs. haha so this red with blue wire i found goes to what wire for the 2jz? i have the entire...

lolz the intake pipes! 45 here and a 90 here to another 90 and intercooler then a 90 a 45 hard pipe then an 270 degree..and throttle body! damn i cant close the hood :( wheres the sawzaw!? damn wtf happened to the dash? now its a floor plate from a utility truck. i cant believe someone let him...

i keep it clean, but thanks for the input. i may have the tires road force tested at firestone garage. see if the machine picks up inconsistency in tire