Search results

WHat you see is what you feel. I can easily feel the ridges. Is that the same thing about the head? Do i need to remove valves and etc to get it done? Thanks

UPDATED with Head pics. See Post #1 please.

DOnt know the year of the block, its supposed to be a jdm one but i know there is no difference. Block was never deck before and the machine shop remove .3mm of it.

Do you have any better pics of it ? A pics where we could see the surface finish better.

Exact, since it was my first engine rebuild, i decided to go that way. It was a stupid idea. I know i will need to bring the block to an other machine shop but it piss me off since i pay too much $$$ for that crappy job.

Second UPDATE : Block look like junk...IT look like the pit are way to depth and the gasket will never be able to seal. I can't understand why they dont tell me that this block is junk. + I took some pics of the cylinder wall, there is rust in it. I can't feel it but we easily see eat. LEt me...

Problem solve. See the answer here : http://www.supramania.com/forums/showthread.php?106892-Clunking-Noise-Help

Ok, problem resolve, it was the steering bumper bolt. I put a small piece of rubber hose on it with some grease and it work perfectly. I need to say thanks to SM!!

I was sure that the sound was coming from the rear?! I dont know why it could be a steering problem related??

I have the exact same problem. I would like if someone that have post here would be able to tell me what was the problem?! I have play in the center bearing. And about 1/4 - 1/2 inch play inside the diff.

Hi, i have a strange noise coming from the rear end. I can only hear it when i slowly turn on the left. Look like its only when there is some turning force applied on the wheel. I cant tell if its from the diff itself or anything else like the axle... Thanks if anyone can help me. I normally...

Hi, i need some exaust system recomendation. I want something cheap and not so bad. What do you think about it : http://cgi.ebay.com/ebaymotors/Toyota-Supra-MK3-86-92-Catback-Exhaust-Muffler-Turbo-NA_W0QQcmdZViewItemQQhashZitem35a6b8f3f3QQitemZ230430405619QQptZRaceQ5fCarQ5fParts Muffler look...

hi, i measured my head and it's around 115.69mm with my digi vernier. I will need to milled it again since i'm going MHG. My question is; can i milled the head again or she's junk? I don't for now how much will need to be remove. The block never been milled, i assume some materiel will be...

anyone?

Hi, i'm in the middle of a rebuild and someone give me a set of brand new piston and ring. Brand should be ITM as write on the box. Anyone know that brand? Quality or not? Should i use those one? Also, the guy also gave me a brand new MHG but i also don't know the brand. Bore look around...

Hi, i notice some heat mark on the crank near the rod. Is that normal??? It may sound like a newbie question but its my first engine job. Not the best pics in the world but you get the idea. thanks

look like i will need to deck the block Block was already deck at least 1 time. Could it be deck again?? i hate to have to remove piston since block was completely machined 20k miles ago. It only need to be deck to get a nice surface.

I already scrap the block on the pics you see. Anyone one else have an idea?

new pics add. NEed your idea. thanks

I will go with a stock Toyota HG and ARP for sure. Could it be a problem if i leave the surface rust in the water pass? I dont want to strip the block because piston were changed 20 000miles ago. Can i change the bearing only with removing the oil pan?