Search results

Dirgle, My car is an 87 but I have a strong belief that the motor was not the original motor. It seems that the freeze plugs that were on this block before were the updated plugs (96411-43000). This answers my question in regards to the Freeze plugs and gaskets. Thank you very much for your...

Hello Everyone, I have been looking around for a few days now and have gone to my local dealerships to see if I can find these parts. Maybe someone here that has had experience with these freeze plugs could help me. On the intake side of the block there are two plugs that go toward the top of...

i'm at 3/4 of a tank, some of it leaked out though when i was replacing the Fuel Dampner line.

Thank u once again. Ill check those out and see what I find out.

When u say depression do you mean exactly?

very true :[ would you say there is a high chance that the head could be crap because it ran so lean? Are those pistons reusable? Thank you for all your help i really appeciate it.

yup turbo wastegate was shimmed 2 washers. I should also say I had a DDP to a 2 1/2 inch exhaust no cat. I was seeing 10 lbs of boost the max i ever saw was 12 and that was once AFTER the knock sensor issue was fixed. I do agree with you they should have been cleaned, One mistake I will not...

Thank you Jdub for the help. The Injectors were not cleaned, they came of the original original motor and at that time were working properly. In regards to the Lexus AFM there's no adjustment bolton mine and the person i bought it from said that he hadn't upgraded it. do some of the lexus AFM...

stock injectors, nothing really in the sence of tuning. It was all stock except for the exhaust, intercooler, and piping which is how i purchased the vehicle. Motor was timed at 10* properly. spark plugs were autolite plugs and they were gapped to .032, i believe have to double check when i get...

hello Everyone I need your opinion on what could have possibly gone wrong with this motor. A little history on the motor it was rebuilt 6k miles ago. Machining work performed to it was balance the rotating assembly, deck the block and head, bored .020 over, and polished the crank and rods...

I looked around to see if i could find the answer to this question but no luck. Would a 2jz manifold mate up to the 7M head? The initial assumption is no, but i wanted to make sure as I have someone that is giving me a 2jz tubular manifold and i was wondering if i could use it. Also another...

That's what mine sounds like, it's pretty much the same setup i am running.

I was just wondering if anybody has header wrapped their chinaman Divorced Downpipe and if they have experienced any problems with the welds cracking? I have searched and seen a lot of threads about whether Header wrapping is good or bad, but have yet to see someone state if they have developed...

Grim to his car, I found a few of my pcv lines are kincked so i am picking new ones up from the dealership, and checking compression today. anybody know where i can get the pcv hoses apart from the dealership? their a pretty penny if i can get some stock replacement goodyear hoses for cheaper i...

Thank you for all the help guys. Would not installing the piston rings exactly per the tsrm cause excessive blow by? I am just wondering trying to cover all my basis. I will go ahead and check my pcv system for blockage and kinks, and also the tb orifice. Just to be on the safe side i will do...

no dipstick was all the way in, i am going to double check my pcv hard lines see if there is any blockage. would a crimp on a pcv line possibly cause this?

Hello everyone. I took the car out for a drive and drove it a little bit hard, pretty much stepped on it all the way to 5k rpm through 2nd and 3rd. Once i got back home i opened the hood and noticed there was a bunch of oil spilled all over the abs housing on the turbo side. I looked at my...

did you program it? i know on my timer it has a lot of options and if you don't have it in the correct mode it will do what you describe. can you per say add time to it and will it count down then? If that's the case you have it on the wrong setting. To change it from settings you have to hold...

did you get a manual with the turbo timer?

I'm in. What are we looking like for an ETA on deposit. I would like to say thank you for this, i have been looking for a kit as i can't afford ARZ's BBK.