Search results

Sun of a &$%@! After seeing that the timing was at 10 degrees T.D.C with the timing light I took the jumper diag cable out and drove it up and down my parkinglot to see how she handled.still knocking only when driving but when it is in neutral or park the knocking stops.the front of the car was...

Got it thank you very much

Kool beeeeeeeeeeeeeeeeeeeeeennnnns.thanks hvyman. ---------- Post added at 07:14 PM ---------- Previous post was at 07:08 PM ---------- Hopefully this will be my last Q.I have Everything lined up but the cam nose isn't looking straight up when I took the oil cap off.can I just jump the diag...

One thing I didn't see in the T.S.R.M in the ignition section was it didn't explain what to do with the cam sensor after the CRANKSHAFT & CAM GEARS Are aligned and the cam nose is pointing up when u look through the oil filler hole.do I just slowly move the cam sensor back and forth while theirs...

I'll do that thanks

I have set the timing on a GE but never on a GTE.now pertaining to the GTE do I unscrew the cam sensor cap? I have turned the crank shaft by hand with the battery disconected of corse.I matched up cam gears with the notches and crank shaft with the zero but when I unscrew the oil cap and look...

Thanks mkiiichip still dusting the webs from my cerebral cortex lol.

That right I knew I was forgetting something.the DAM EFI FUSE thanks.I saw in the t.s.r.m the section that has the T.P.S picture but didn't show how to install it cause I can rev the engine high with the Tps disconnected but when I connect it it only revs as high as 3 grand.can somebody send me...

I have 2 codes that are 41 and 51.But when I disconnect both terminals from the battery and wait 3 min and check the codes again they still pop-up,any sugestions?2nd 2nd I can't find in the manual where it shows u how to set the Tps,what section would the setting be at????

Never would of thought champion but I'll give it a whirl thanks.

hello my Fellow Supra lovers I have a question dealing with the subframe if that's what its called.I called the dealership to order 2 bolts that screw into the rear of the frame to the body of the vehicle but they said they don't sell those bolts anymore.I have a exploded diagram of the bolts...

Sorry guys just realized I put this in the wrong post due to this car is a 89.

I called the Toyota dealership to get a price check on these bolts that are numbered on the diagram 90119-12090.they said they don't sell them anymore so could anybody look at this diagram and let me know where PLEASE?

Ok thanks guys.

I had the same problem due to my valve covers weren't on tight enuff and oil was seeping down into the sparkplug chambers.also u might need to replace your black gasket that lays between your valve covers.

Thanks guys and the oil I'm using is a full synthetic made by supertech.

Just bought a "89" 7mgte from my friend and I am IMMENSELY FULL OF JOY due to my last supra was a 7mge with a cracked block:cry: I just learned that they can prolong the life of a turbo by letting the car idle for a short period of time to Kool the oil and turbo after use.My question is why...

I MENT TO SAY that I didn't say the window was broken.I need to make keys so I can turn the ignition and push the button so I can WIND THE WINDOW UP.Plus I can't drive the car if I don't have any keys!!!

Razoeee are u saying i stole this car?????? ---------- Post added at 01:49 AM ---------- Previous post was at 01:42 AM ---------- Northwest supra how said the window was broken????????

Calm down guys its not stolen I just can't read the vin in the dash.is their another place the vin might be???