Search results

I switched it because its simpler. If you want one I have 5 more.

the trigger wheel will be tack welded in place. im using the ati damper so yes...it will work with it

Installed 1 " npt plug and got the new crank trigger wheel. Sent from my SM-G925V using Tapatalk

I do web application development for the most part. I use project management software so I figured id try some of that on this project (simplified version of course)

Speaking of getting this running...I made a reasonable goal of getting this thing running within 60 days. In order to keep myself honest...I've made a little excel sheet to keep track of everything. Sent from my SM-G925V using Tapatalk

A block off is ideal but more $$ and time which I don't care to use more of at this point. An npt plug looks clean and its cheap but pretty much ruined any chance of selling the head if I ever came to that point. This build is pretty much at a stage of zero f's given. I wasted enough time...

Finally spent some time this weekend on engine. Had to port the manifold and turbo exaust housing to clear the valve. Plugged up a few additional water housing holes I won't be using. Tapped a 1" npt thread in the cps hole for a cap. Alot of little things are adding up to alot of time...

jurp: subframe bushings are from ronniek on these forums. Thread is here http://www.supramania.com/forums/showthread.php?156551-poly-subframe-bushings-kit not sure about the silicone on the front plate of the trans. I'm assuming they sealed the trans properly, lol. I've never opened up an...

The pan is Dooley Enterprises. Not much for an update. Been distracted again with life. Got the intercooler and I tasked out all remaining work to get this pile of crap running. About 110 hrs of work remaining O_o. Also made a new trigger wheel design. I think I'm going to try this one...

Got the pan done. Heat dispersant ceramic exterior and oil shedding coating on the interior. Just need to swap the subframe then I can throw the motor in finally. Soo close but so far.

Still not running but I've got subframe parts nearly done xD

So the plan is to fire this thing up in about a month. I think it's a reasonable goal. I have all the parts. Alot of powder coating, wiring and welding is still needed but it's gonna be doable. mounted my racepak dash. still have to create a somewhat reasonable harness for it. I plan to...

Took 8 months for them to get to mine. They still build r154s if youre patient and can wait for parts etc. People kept complaining how it took forever so they took it off their site. Sent from my SPH-L720 using Tapatalk

I didn't really look at the front plate. All I did really to inspect it was turn the input shaft and it feels like glass, lol. Overall the trans looks really high quality, but I guess time will tell. I will check out the front plate and see what they did there, but i'm 100% confident they...

Not much of an update. I've been distracted with girls ^_^ I got everything I need to put this pile of crap together except a bunch of little things. I need to order some more crap then I am gonna throw this thing together on my xmas break. Most recent needed piece I got was the Jacks...

Yes I was but it took too long for them to release it Sent from my SPH-L720 using Tapatalk

Yeah I do think it will run first try but I just have some uncertainty based on what proefi told me. They basically told me the 36-1 wheel can be oriented any clock position and I just need to have the cam sync event occur between any crank falling edge and just before TDC. It just seems like...

How I see things going down: First attempt: 1. wire up proefi myself 2. attempt to get the 36-1 trigger wheel firmware with a 2jz vvti tune working 3. hope the car starts. 4. fail. Second attempt: 1. tow the car to induction performance and have them get this thing running, lol If I get...

Tampa. You haven't seen this thing cuz it hasn't been running for about 8 years now. Just a little update: The transmission is apart finally at a jacks transmissions and they are doing the micropolish on the gears. The motor will be going in once I get the transmission back. This thing...

That sucks but at least this will be running soon from the sounds of it. Which standalone you running? Sent from my SPH-L720 using Tapatalk