Search results

^ This. When I pulled my window motor out of the car I had to move the window around to get to all the bolts. With the door panel removed just unplug the window motor and apply power to it. All I did was take the 9.6V battery from my cordless drill and connected a couple of wires with female...

Sounds like a good plan. If you can muster the 20% down payment you will have a much easier time getting a loan and you will not have to pay PMI on the second loan. Whats funny is my friend said if he ever buys a house again he is going to stay in the house overnight prior to closing.

A few more things to consider. If you have kids or planning to have kids You may want to be in a neighborhood with great schools. Also you have to think what your goals for the house is. Is this a long term place to live or a starter house. How much yard work do you want to do. I learned I...

There is one that does not come with the kit. I bought mine from Toyota when I replaced all my bushings. I think it is that one in the spindle that is more towards the rear of the car. You can tell if you hold on to the body of the bushing and the insert can pivot and move around quite...

A couple of things from my home buying experience. 1. I am assuming you want a house with a garage so you can work on your supra. When searching listings tell your agent to also include houses listed with 0 garage space. A lot of times Realtors get lazy and dont always put in the correct...

I had a centerforce in my old supra. I thought it was an ok clutch grip was good and wasn't to bad in stop and go San Francisco traffic.

Ford festiva http://www.youtube.com/watch?v=Pzd5MXt0ZVA&feature=related dodge omni http://www.youtube.com/watch?v=qEjpqw7VgLE&feature=related escort with mazda turbo motor plymouth reliant? http://www.youtube.com/watch?v=PK79quQY5BM&feature=related A beater station Wagon...

Have you seen "A Night at the Roxbury?

Sup guys. I have a gt35r that I bought from a forum member here and I am getting ready to put it on. Parts that I have on hand to go with it are as follows, gt35r exhaust manifold downpipe oil feed line oil drain adaptor -(bolts onto sump) exhaust manifold studs/nuts for the lower...

Hey guys, I have a fan controller hooked up to my dual electric fans. I think it is this model. http://www.summitracing.com/parts/FLX-30332/ I was working around it and my socket wrench (undoing the headlight bolt on the radiator support) touched the metal wire for the temperature...

Found a list of the nylon bushings from a previous for sale thread when doing a search. ITEM:6/6 Nylon Bushings - 22 pcs. DESCRIPTION: 1. Front lower control arm (4 pcs.) 2. Front upper control arm (4 pcs.) 3. Rear upper control arm (4 pcs.) 4. Rear lower control arm, subframe end (2...

That is always a hard decision. It really depends what your plans are in the long run. I would think after the engine and trans rebuild (along with your other work) it should be pretty reliable other than little things like alternators and starters going out. The pic in your avatar looks good...

I swapped my 1j into an 89 shell with the 3.9 gears. It used to be in an NA sport package with the 4.3 LSD. I personally preferred the 4.3 for the acceleration and around town driving. The 3.9 just feel slow. But in the end I am putting on a gt35r so I figure when I up the boost it will feel...

I used the VHT high temp paint on the turbo shield of my 1jz. It also says to bake it in the oven, but there is no way I am going to stink up my whole house to do it. If you have an extra oven outside sure why not. You can also cure it on the car by running the motor, directions are on the...

Yah, I dont know what the big deal is about higher octane. We also get no love on the motor swap tip. Even though an engine runs clean you cant legally run a 1j since it was never offered in the US. And like everyone else said run 93+.

I run 91 in mine. It's the highest fuel I can get in California. Everywhere else gets like 92 or 93. I would suggest running the best pump gas you can afford especially if it is modded.

Yah he did. But I think this pre dates it at least that was what the yahoo blurb about it said. I wonder if they used an MKIII as the lead car if it would bring the value up on them like the MKIV lol... I hated the first one for that reason. I could have bought a TT MKIV pre F&F for 15k...

I think it is Bomex as well. I see it alot on the car used for their photos. Just search Bomex Supra in google images.

I will watch it, But unfortunately they keep going away from the import culture and trying to make it more of action chase, cops and robbers film.

Mine was a 66 Ford Rustang with a gutless inline 6 with a hole in the hood. Friends always laughed that it was a bullet hole. I had plans for it but decided I didn't want it anymore and sold it.