Recent content by rawmk3

You can build a boost. Leak tester for a few bux with things you find at any home depot, menards. Or. Place. Like. That. You. Will need a rubber coupler that. Fits the. Inlet. Of your turbo (measure to figure. That out). You. Will need a pvc pipe end and a fitting to. Connect. To. An air source...

Just need to determine the solonoid resistence and make any alterations to the current setup to run it on other platforms. Sent from my T-Mobile G2 using Tapatalk

Same thing for the dsms.. this however is going to completely bypass the tcu to control the solonoids. Now I need to find someone who would want to test this and we have to determine the input of the coils. The idea here is to have a standalone similar to the suprastick however it will be...

Ok what is the retail on that? We are developing something for dsms currently that will take the place of a shift kit as well as allow push button shifting. About the size of say an afc monitor maybe smaller. Looking to make a very affordable product that has amazing potential. Currently...

I'm lookin for some info on the auto trans in the supra. Does it use 2 solonoids to control the shifts is the first question. And the next question is does anyone make a pnp push button shifter for the mk3's? I know auto's are not desired at all, but who would be interested in an auto that's...

Hey all, I am trying to find out if the auto is shifted via solonoids and the tcu. I am testing a shifter for another platform atm and am trying to see if I can broaden the market a little. To basically bypass the tcu for shifting and shift via push button or paddle shifter or really any...

May I suggest getting a small piece of flat steel and just have it welded onto the stock upper mounts and drill a hole where the bolt goes thru. Simple to do and keeps you from needing to destroy the stock ones. You really need a rubber or foam padded insulator for the rad tho. Extending the...

Ummm JDUB a compression test isnt going to judge blow by that would be a leak down test. A leak down test tells you what kind of pressure loss there is in the combustion chamber and thus tells you if you have an issue with rings, or valves.

Oh JDUB, high pressure in the crank case and thus PCV system, and low pressure in the turbo tube; aka the accordion pipe is a significant pressure differential.

Jdub, you and I have gone round about this a few times now. And to explain both parts lets do this step by step. The PCV system for the 7m is already pretty retarded. The line coming out of the block, up to the head using about a 1" tube is an oil return and part of the PCV system from what I...

IJ, couldnt it just be a simple mess up on the vaccume for the BOV? He said he is venting to atmosphere and said nothing about a piggyback on the ECU. If he is running a AFM and its metering the air and his BOV is leaking at idle, that would cause it to sputter and die would it not? Ticking...

Well im sure I will be told im wrong with this because of who is posting i here, but I had a problem like this after an AFM swap thinking my old AFM was bad. Swapped to a known good one from a friends car and still kept stalling. After checking and rechecking everything in the intercooler...

Where did you get the modular lights like that? I want to do something similar to that with mine, but cant seem to find anything like that. Any places or sites you can send me to find those?

I know you are pretty advanced in things involving odd things with the supra and wiring. Do you know of any crank triggers that will work with the AEM stand alone for the mk3? I am planning to get rid of the CPS and go with a magnetic pickup on the crank if I can, but I have not really seen...

Unless your running a MAP based system, venting to atmosphere is still going to cause you to run way rich, which is also going to make you foul plugs faster, and fry your cat. And being that you live in arlington heights, I know for a fact you have emissions requirements to meet. And running...