Recent content by 1970hd

Is the bell housing of the gte auto the same as the ge (A340E), also I need to know the dimension of the torque converter bolt pattern mainly straight across center to center of the bolts. toyoid.com gives a different part number of the converter, flex plate and bell housing of the gte and the...

Hello all, I have been trying to contact Rich from SIP Racing for several weeks now and his mailbox is full and no answers to email.Does anyone in the Ohio area know if he's alright? is his family ok? Just checking on him as I have purchased parts from him before and don't want to miss an...

I also have the siemon 550 injectors, put them in a couple years ago and I am very pleased. got them from Arron at driftmotion, I use the afc but added a vpc to get rid of the lexas afm had some drivability issues with it in an automatic, wanted to go rich for a few seconds coming to a stop and...

Corky Bell wrote a book Maximum Boost very informative should help. Don't let the math scare you

I think he just used steel washers and the kickdown is the cable that runs up to your throttle linkage so when you step on it to pass the car will down shift to help you pass. If this is clear as mud I'll go back and read his article again and see if I can help. Van I think shimming the...

I think the water temp has to do with when it shifts to O/D, I had a loose connection on the TPS and the trans was in limp home mod and shifted funny, now I found this when I switched ecu 1 through a code and the other one didn't it a cheep look under the hood and push on a connector

ok the bigger splined shaft is a support and it doesn't spin just the inner shaft, the inner connect is through fluid pressure and cluches so (not an expert) but I don't think you can spin the output shaft just by turning the input shaft. now is the c shaped thing in the tq converter? if it is...

well hvyman here in Tx. I guess we don't have a yard full of supras so the price is higher, after you call 10 yards and only find 1 and he wants $300 what do you do? I look on here and hope for a better price

Hey guys, I think the manual says it won't shift to O/D until the water temp comes up not 1st to 2nd so I think you both have a problem, also if you don't have a good connection for the harness on the TPS it will go to limp home mode and skip 2nd shift funny how ever you want to put it. But if...

out of a local salvage yard they go for about $275 but I notice here on the forum it's about $175 cause it will cost about $100 to ship across the country so the price is a wash, you might find somone to trade, if it was a month ago I would have bought it but I just got another 3.73 to put my...

Yes you can put it together wrong without hurting anything, but the fluid should have been red, and I feel your pain on puting a trans in and out. I've done mine 3 times to get that 12.8 ( IPT trans, 3200 stall 61mm turbo@15psi, 141000 miles, stock head gasket and my friend wonders way I haven't...

your A/R may be to big, read the book Maximum Boost by Corky Bell, I have the same problem and all I can say is works great on the street at speed but sucks from the dig, the bigger the A/R the more power but also more lag

Was the fluid clean when you drained it? smelt burnt? shiney metal particles? did the trans work before you pulled it? souds like you didn't get the converter in far enough to engage the pump. fill the converter, slide it in the trans, rotate it till you feel the 2 cut outs on the converter...

Hello, on Supra Forum, the other forum, there was a thread on how to raise the shift points with pics, the guy was very informative on autos, I'll bet he could help you out on the overhaul. if I get time tonite I'll look for the post . www.supraforums.com do a search on automatic transmissions...

Hello, just joined and want to introduce myself, First I am 52 and not totally computer literate so be patient, My car is a 1991 automatic SP61BB, Titan downpipe with BlitzNur exhaust, 550cc injectors and Apexi to tune it with, IPT worked trans and converter with 141000 original mile and a best...