Search results

  1. cml61386

    Need a little help.

    I'm feeling pretty dumb asking this but I actually want to lower my boost right now my car spikes a little over 15 psi and I don't wanna run that high without a fuel pump and a bigger turbo. I have a mbc that I made, tried to turn the boost down didn't seem to have any luck. Figured I'd ask. The...
  2. cml61386

    Maft Pro crank but no start

    I recently installed a maft pro that I bought followed the directions and set it up for speed density. So here is my problem I turn the key on maft pro powers up, car turns over it spits and spudders and tries to fire, then dies. I can smell alot of fuel so I think I'm flooding the engine out. I...
  3. cml61386

    Two Questions?

    First one is what is your Air/Fuel ratio at like 2-3 lbs. of boost at partical throttle with 550's/Lex and afpr. My other one is my cruise doesn't work. When I turn it on I here a relay click I set it arond 70 mph or so. Let off the gas pedal and the car starts slowing down. Then the trans...
  4. cml61386

    Help

    I've searched around some got some idea's as to why my car will not start. Over the weekend I put in 550 injectors and a lex maf, I have a BIC DDP with a full 3 inch exhaust, WB O2. Turn the car over spit and spudder but wouldn't fire right up. A few times it would start but it wasn't running on...
  5. cml61386

    Need some suggestions as to what the problem could be

    So I was driving home from work when I noticed my dash lights and radio flickered. Keep an eye on my volt gauge was charging higher than it has around 14.5v to 15v. Then got home and just about shut the car off and it died. The car will start up again with a jumper pack. I'm figuring the battery...
  6. cml61386

    Few questions about crankshafts

    Has anyone heard of knife edging a crankshaft or bullnoseing a crank? I learned about this in school awhile ago and found this link that maybe helpfull. http://www.enginebuildermag.com/Article/1490/horsepower__building_in_and_bolting_on.aspx If you have never heard of this it is machine down...
  7. cml61386

    Automatic tranny question?

    Does anyone know or has found out that the a340e I believe (correct me if im wrong) is the same tranny as a AW-4 that Jeep runs in there vehicle's? Only reason I'm asking because the guy I bought my car from rebuilt the tranny using a Jeep Tech Manual. So I figured I would ask the auto tranny...
  8. cml61386

    Anyone running Spal e-fans?

    I was doing a little research trying to see if there where any other threads about Spal fans. I couldn't find anything that would answer my questions. So my question is, how many people are running these? Are they any better than the competion? What is there rated CFM at operating amperage and...
  9. cml61386

    Best bang for your buck piggyback

    I was wondering what everyone thinks is the best piggyback system for your dollar?
  10. cml61386

    550cc Injectors with clips Great Deal

    A friend of mine found this company on a different forum because he knew I was looking for injectors. I emailed the company and got a response back that they do sell injectors for a 7mgte. A balanced set of 6 550cc inectors with upper and lower o-rings and connectors $479. It gets better there...
  11. cml61386

    Need help!!

    I have an 89 auto and I just recently put on a DDP. I finally just got a mbc that was a homemade. And I'm wondering what exactly I did wrong or I have a larger problem. When I get on it, boost goes past 8psi(stock gauge) then I hit fuel cut. I'm pretty sure the mbc is turned as far down as...
  12. cml61386

    Slip ring or Clock spring?

    Does anyone know if you can still buy one of these? Which defention does Toyota use?
  13. cml61386

    Exhaust header wrap on the downpipe?

    I was wondering if anyone has put exhaust header wrap all the way down there downpipe? And if so did they pick up horsepower or torque?