Search results

My car won't roll in neutral or in gear.. Its a r154 with a stock jz flywheel and a act 6 puck unsprung disk. I've had a friend turn the crank from up front and I can see everything spins good without fork.. now with the fork only hub stays firm. The fork has a lot of play to the point...

Quick question guys.. I just bought a jdm 2jzgte motor and today I decided to check the stock turbo's... When I removed the front charge pipe off the turbo in front oil just came rushing out like crazy. There's no oil in the motor now but when I did the compression test numbers Were 175 straight...

I got a 1j single turbo (Precision DBB 67) and for some odd reason the turbo started making some strange sound like the wheel is grinding.. but when removed down pipe everything looks fine. My current setup is 440 with DBB with aem wideband... car is also untune so I know by driving it can cause...

Can I use a 7m resistor pack on my aristo harness??

Hey guys I got question.. I want to buy a used 1j r154 flywheel but I'm not sure whats the best way to tell if its a r154 or w58 jz flywheel?

I plan on doing a 2j auto swap in my cress in about a month or so but where my problem stands is the tail of the 2j auto tranny. I was thinking that since the 1j are found in the Jzx90 I can swap the 1j tranny onto the 2j motor. I'm trying to keep my stock driveshaft. But the question I'm asking...

A supra owner told me that i dont need boost lines from turbo to wastegate to make boost is this true or not? And my vac keeps going to -25 When you drive the car up to about 4-5k the boost gauge stays at zero and the sounds like it dieing but not in that sence. Just...

Wondering how much a 1jz supra will sell for. Here a list so far of parts Body parts list 1.1989 supra t-top 5spd no rust 2.91 all white trim 3.6" speaker pods with celestion speakers 4.burgundy leather interior cracks in driver and passenger seat no rips back seats are crispy clean...

Hey guys yesterday was the first day i drove my 1j single turbo supra to the exhaust shop.so while driving there the car moves beautiful with no boost with open downpipe. The car was able to rev out at 75k before the exhaust. So while driving back home the car feel lazy a bit and not reving pass...

hey guy i want to know if i have a problem.i have single turbo 1j and i have not drivin yet just start it every 2-4 days.for the pass 5 days it was raining and the week before it was chilly.sunday i plug all coolant passage and add water to check for leaks.so today i started it and it ran for...

wanted to know how long will take to spool a t70 with a .96 back housing? I know its past 45k! right or wrong performance mods 550 afpr safc bcc walbo just 1 thinking i might have to go with 2 Thats all for now. thanks B

Hey guys I was Hoping that someone can help me with my decision making on these 19"rims and if possible make the car 1 color white. thank you S.F.M

Hey guys i've been on here for a while and i never seen a thread on intercooler piping.so i said let me try and start one.

ok what's up guys I wanted to know why my 1j single keep spitting out flames?Right know the car has 550cc with a single turbo.Before the intercooler piping it was doing the same thing but not as hard.Now that the i,c piping is on the shit gets crazy just to move the car from side to side of the...

Hey guys I just drop in my 1j and i have a oil leak."how i know" my timing belt has oil on it and its running down the front of the engine.The shop that rebuild my head i think they put 2jz cam seal.so my question is can 2j cam seals work for a 1j?:1zhelp:

Would this 2jz downpipe fit a single 1jz setup. http://cgi.ebay.com/ebaymotors/Supra-Turbo-Downpipe-Down-Pipe-2JZ-GE-2JZ-GTE-2JZGTE-3_W0QQitemZ190329002229QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item2c507e18f5&_trksid=p4506.c0.m245

Hey guys i've been workin on my valve cover cause my motor and sh*t is at the machine shop so there nothing to do but clean. check it out it took me about a hour and half to finish ...http://i447.photobucket.com/albums/qq196/jdmsupra347/moto_0111.jpg

Would the 2j headgasket fit a 1j with out problems? If you have a brand new 1jz headgasket let me know a.s.a.p

Hey guys im in the progress of building a 1jz or a 1.5jz , im not sure which one to run with.But im opening this thread on this turbo that i want to buy.http://www.turbochargers.com/store/p...oducts_id/1667. Would this be the best one to get? Can a 1jz stock bottom end handle this turbo or...

Ok guy i need a little bit of help here.Where can i find the efi fusible link on my 87 supra turbo model? Thanks B