After putting my motor back together after a bhg, i noticed it had a random misfire at idle and when reved up and held at any rpm you can hear the "put-puttin" every second or so from the tail pipe.
I checked the resistance of the pick up coils in on the distributor and compared them to the...
Been doing a bunch of searching, can't find the resistance values for the knock sensor on a 86.5 7mge..is it even in the tsrm?
Sent from my LG-LS980 using Tapatalk
So I'm in the process of replacing the head gasket on my 7m, just wondering if these water ports look 'usable' on the mating surface of the head..
All the pics ive seen of 7m heads after coming back from the machine shop dont have this much corrosion around the water ports. Is this head...
Based on my research on this forum and some other ones, most people equate the source of a 'jumpy' temp gauge to be air in the coolant. But mine has been doing this for a while and it gets to be kind of ridiculous at times.
When i replaced the temp sensor, i also replaced the old, broken...
So yesterday I find out that my brake lights don't get triggered when I step on the pedal. The light that's on the gauge cluster flickers really weird once I start the car and then shines solid when I step on the brake. I went to the hatch and pulled off the covers and the two main bulbs on each...
Does anyone know what the exact part number is for the clip that holds on the "Toyota Supra" emblem?
And does Toyota still sell the clip?
I put in the part number found in this diagram onto Toyota parts zone, but it comes up with some headlight cleaner clip...
I'm finally going to get an...
I just bought an aluminum fan shroud for my 7mge. It's never had a fan shroud (even the stock one) for the year and a half that I've owned it. When going from cruising at 75mph on the freeway to being stuck in Chicago traffic in a matter of minutes, the engine heats up because there's no shroud...
Hey guys, question for you who might have experience with KYB Gr-2 gas shocks. Would these shocks be upgraded enough to be paired with Suspension Technique Lowering Springs?
So I was just wondering how exactly to press out the LCA bushings with a 12 ton press? Due to their odd shape, I'm just a little lost as to how to actually put them on the press.
Noticed that this clip was broken. Its the one that sits on the very top sensor on the water neck. I just need to know what orientation the black and green wire go in the clip with. Using the marked side of the clip (pictured below), can someone tell me what order the wires go in from left to...
Getting my engine put back together and into my car. Theres a couple things I need sorted out though.
First, where does the vacuum line coming out of the Power Steering Pump go? Mine was going nowhere before I pulled the engine. I believe the line I refer to is at the bottom left side of the...
I'm pulling the engine soon to give it some TLC, but I cant find the other engine hanger..
I see the one that's part of the alternator bracket but where's the other supposed to be?
I decided to re-wrap a section on my wiring harness that was all beat up and nasty looking. I stripped down the old wrap from where all the connectors hook on to the thermostat housing/MAF, back to where it comes out the front side of the intake manifold. In doing so, I found this yellow-black...
One of my exhaust threads inside the head is completely shot and won't hold the bolt = Nasty/annoying exhaust leak.
I figure it would probably be best to just re tap all the stud holes and use brand new bolts for them. If they are currently 10 x 1.25, what would be a good size to go up to on...
I'm trying to trace the wires going to my dome lights because their not working. I've checked the fuse and its fine, I've also cleaned the grounding points for the bulbs, and checked that the bulbs are fine. If any one could help me out with how in the world you remove these damn handles I'd...
Hey guys,
So today I decided to install my stereo repair harness onto the existing bundle of chopped up wires coming out of my center console. Everything was going fine until I finished splicing all of the wires coming off the harness and found these two wires; one is pink with a blue stripe...
I just purchased a stereo mounting bracket from eBay for my 86.5. My car didn't come with one at all and so I'm wondering what size/type bolts or screws I could use to fasten it to the dash?
Does anyone know where I could find a diagram for where the bottom hard line coming out of the charcoal canister goes? I saw that it wasn't connecting to anything at all. I noticed that there's a pipe/grommet coming out of the firewall that also is connected to nothing and I'm wondering if it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.