Search results

Ok....FML. Tank has been drained and dropped for 2 days. I decided while i was down there to change the fuel filter...What a mess. the banjo fitting going to the tank came off easily but the other side of the filter is just STUCK. Its been sitting and soaked with PB blaster for 2 days now and...

Ok guys, Based on the suggestions, I've just placed an order for a walbro 400lph. It should be here next week. ::fingers crossed::

Ok so update. Tried the 4644's, Coils were wrapped, tried gap from .022 to .028 with no change whatsoever. Breakup around 17psi (Pulls hard and healthy but nothing above 17) AFR's read the exact same. Factory 1jz ecu. Not sure why a DLI would help when it ran flawless above 20+ psi without...

no update as of yet. Maryland's weather has been pretty damn hot lately.

Fuel pump is about 8 months old. Simple walbro 255. Fuel pressure is rising on boost. Can you or anyone else justify that i am running out of fuel? or is what is showin lean on the AF guage the result of lack of spark or detonation? I would assume a misfire could be misleading on both accounts...

First off thanks for all your previous support. I am posting this as a means to find closure to this issue I have been having. A few months back, My 1jz Single put down just a pinch over 400whp at 22 psi. I would say it was on a great tune running simple 550s and an AFC combo. This is not a...

Like the title says, been considering going back to the factory catback..A new BOSAL catback factory replacement is said to be approx 2.5in piping (im sure POS crush bent) but i wanted to see how much power i should expect to lose. Currently around 400whp through my single turbo 1jz. Just need...

Thanks bro - i might just go buy the tip and try. We will see. Yea one of my early jobs when i was younger was a paint boy..i worked in a body shop just started by taping and masking things. I later apprenticed as a painter and now that i know, ive painted about 5 cars (3 of them my own) Its...

Hey guys, still debating on whether i should get the 75mm HKS from DM or go with Raptor's catback. Both have great customer service and i commend both for that. Bottom line though - since i already have a 3 inch exhaust that loud as garbage (sounds nice though) it is just tooooo loud for any...

You are right about that. I remember the 7m being less raspy. I love my 1jz though.

Thanks for all your input guys. Im still in the grey zone but im sure ill make a decision soon!

Hey guys, Ive seen the vids with the Raptor Racing catbacks. I have a 1jz w/ big single and I was curious to know what a 1jz with that exhaust may sound like. The only vids I can find are those with 7ms and they really do sound nice and quiet. But those that I find with 1jz's have only been...

Hi, I have a 92 Turbo with a 1jz. I currently have a full 3inch Apexi N1 Canister style exhaust...Problem is.. its loud. My truck is my DD but i want to take the Supra out sometimes and enjoy it more often but the noise has finally caught up with me..yep you guessed it, got pulled over and...

Thx for the tips heavy.. So correct me if im wrong but this would explain that: - The factory oil pressure gauge is not routed to the ECU at all and is directly wired to the back of the dash? I hooked up the sensor wire to the 1jz sensor and so im guessing that was incorrect? (Sorry guys i did...

Hi guys, I searched the forums but it appears my queries are too short to provide any reasonable results. After i bought my supra years ago and performed the 1jz swap in my 1992 chassis, the oil pressure and boost gauge (factory setup) never worked. I never had this problem or care when i had...

I ran a 10 inch wide tire on my NA-T SC300 for years before i sold it, it just looked better period and was not hard to turn. My Grand National runs a 10inch widewheel up front but does rub on bounces. It was just a question really. HTH *EDIT* The buick "ran" that wide of a tire but were...

Thank You BorHor, i appreciate the quick response. Do you run the same size up front by any chance? thanks again brother

anyone?

I was also curious about this. Posted this info on another board and on this site but didnt get any feedback. Can anyone chime in and help? Also curious about the wheels and the tire fitment needed for the 17x10s. Thank You

heres a guy i met a while back that sold this set...you can see the pics on the ad http://zilvia.net/f/wheels-tires/293702-sc-mustang-replicas-17x10-20-5x114-3-a.html thank you in advance