What did you do to your supra today? Pics
- Thread starter boostinsupra
- Start date
GC89;2057756 said:
Thanks! Yes I believe they do hydro-dip the parts to recreate the carbon fiber hydrographic look. They do custom paint colors also.
I dropped full coverage from the Supra. I don't pay hardly anything in the grand scheme of things, but it still isn't worth it over time.
.
Gave her a quick wash, took the top off and drove over to the Cars & Coffee meet in San Antonio. Pretty good bunch of cars but there were only four MkIVs scattered around and one other MkIII. Every time I looked back at mine, people were standing around smiling and taking pictures. :icon_bigg
Gave her a quick wash, took the top off and drove over to the Cars & Coffee meet in San Antonio. Pretty good bunch of cars but there were only four MkIVs scattered around and one other MkIII. Every time I looked back at mine, people were standing around smiling and taking pictures. :icon_bigg
-Fixed my Turbo oil leak.
-Installed a Thermostatic Oil Sandwich Plate, thought it wouldn't work with the lack of space but I figured it out.
-Relocated the Oil Cooler.
-Changed Front Lower Ball Joints.
-Changed Rack & Pinion Boots.
-Changed Tie Rods.
***Took the Supra off jack stands and took her out for the First time around the block; no plates yet...
No e-brake, I'll fix that tomorrow.
Bought a few more things last night:
-Front & Rear Brake Pads
-Clutch Master Cylinder
-Brake Master Cylinder
-7MGTE Timing Cover Decal
-Side Turn Signal Bulbs
-Installed a Thermostatic Oil Sandwich Plate, thought it wouldn't work with the lack of space but I figured it out.
-Relocated the Oil Cooler.
-Changed Front Lower Ball Joints.
-Changed Rack & Pinion Boots.
-Changed Tie Rods.
***Took the Supra off jack stands and took her out for the First time around the block; no plates yet...
No e-brake, I'll fix that tomorrow.
Bought a few more things last night:
-Front & Rear Brake Pads
-Clutch Master Cylinder
-Brake Master Cylinder
-7MGTE Timing Cover Decal
-Side Turn Signal Bulbs
Got my flywheel resurfaced, arp bolts, need to source some pressure plate bolts. Will need to chop off the rice muffler but I got a full ss exhaust now! Hopefully motor goes in this weekend finally.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Replaced my:
Clutch master
Clutch slave
Power steering pressure line
All three were leaking.
Then I retorqued the mls head gasket. Previous owner had only torqued it to like 45 ft-lbs.
That would explain why I was pushing coolant into the overflow bottle.
Clutch master
Clutch slave
Power steering pressure line
All three were leaking.
Then I retorqued the mls head gasket. Previous owner had only torqued it to like 45 ft-lbs.
That would explain why I was pushing coolant into the overflow bottle.
Lol and what caused it to break in the first place. ....A-to-the-J;2058954 said:Got my Beech shifter repaired.
Sent from my iPhone using Tapatalk
MkiiiAllDay;2058959 said:
Oh you know....you [emoji6]
https://vimeo.com/139757549
Sent from my iPhone using Tapatalk
-Fixed my fog lights
-Changed brake master cylinder
-Changed clutch master cylinder
-Changed all brake pads
-Fixed exhaust leak
-Waiting for my parking brake shoes to come in, can't pass inspection without an ebrake
-Put in leds for cigarette lighter, ash tray, glove box, ignition switch and driver feet area. Still waiting on the leds for the dome lights, hatch and door panels.
-Changed brake master cylinder
-Changed clutch master cylinder
-Changed all brake pads
-Fixed exhaust leak
-Waiting for my parking brake shoes to come in, can't pass inspection without an ebrake
-Put in leds for cigarette lighter, ash tray, glove box, ignition switch and driver feet area. Still waiting on the leds for the dome lights, hatch and door panels.
Went to pick my supra up from getting a standalone, cams with gears and a tune done. But within the 24hours when I was told that my car was all done and ready to go I show up to find the shop forgot to call me that my brand new standalone decided to fry itself. So ended up leaving depressed without my car and now waiting to see when another ecu will show up..... sigh
bluebullet89;2059196 said:
I got mine from superbrightleds.com, been on for like 2 years but car has been down for a while spun a rod.
Sent from my iPhone using Tapatalk
Finally got my clutch on, called comp clutch to figure out which way the clutch disc went on didn't know if it was diff from stock turns out it is. Motors finally going in.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk